GUS-QS001-01-56R0-J Datasheet, PDF (1/1 Pages) IRC - a TT electronics Company. – TaNSil0 0.025 Lead Pitch High Frequency Resistor Network

TaNSil^® 0.025" Lead Pitch
High Frequency Resistor Network
QS001 Series
• Pull up/down resistor
• QSOP package - small footprint
• Parallel transmission line terminator
• High level of integration - replaces 22 discrete resistors
• Center located ground pins improve signal integrity at high frequencies
IRC’s QS001 series 24 pin QSOP resistor network is specially
designed for operation in digital circuits with high frequency, low
propagation delay requirements. The device contains 22 TaNSil^® resistor elements which provide rug-
ged, reliable, trouble free operation. The dual, center located common connections provide reduced
propagation delay and improved signal integrity over standard bussed schematics.
Electrical Data
Resistance Absolute
Range (Ω) Tolerance (%)
TCR
(ppm/°C)
TCR
Operating
Tracking Temperature
(ppm/°C) Range (°C)
Maximum
Operating
Voltage
(volts)
Maximum
Resistor Power
Dissipation
(watts)
Maximum
Network Power
Dissipation
(Watts)
30 - 100 ±5, ±10, ±20 ±25, ±50, ±100 ±5
-55 to +125 100V or √ PR
0.1
1.0
Schematic Data
24 23 22 21 20 19 18 17 16 15 14 13
1 2 3 4 5 6 7 8 9 10 11 12
Ordering Data
Sample Part Number
GUS - QS001 - 03 - 56R0 - K
Family
Model
24-Pin QSOP
Temperature Coefficient
01 = ±100, 02 = ±50, 03 = ±25
Resistance
Standard MIL resistance code
(Example: 1001 = 1000Ω, 1003 = 100,000Ω)
Tolerance
J = ±5%, K = ±10%, M = ±20%
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
QS001 Series Issue December 2008 Sheet 1 of 1