DBP-M954-01-1002-G Datasheet, PDF (1/3 Pages) IRC - a TT electronics Company. – TaNFilm Precision Molded DIP Resistor Network

TaNFilm^® Precision Molded
DIP Resistor Network
M900 Series
• Ratios tolerances to ±0.05%
• Absolute TCR to ±25ppm/°C
• Superior TCR tracking to ±5ppm/°C
• Custom circuit schematics available
• Sn/Pb and 100% matte tin terminations available
IRC’s TaNFilm^® M900 series resistor networks are designed for
use in applications requiring a high degree of reliability, stability,
tight tolerance, excellent TCR tracking, and low noise. The molded construction provides excellent
dimensional stability for automatic insertion. Our continuous feed, high vacuum sputtering process insures
uniform properties from network to network. Precise state-of-the-art laser trimming enables us to easily zero
in the tightest ratios. Passivated Tantalum Nitride resistor film ensures performance far superior to military
specifications and provides excellent environmental protection.
The versatile nature of our photo-etch process makes it possible to supply virtually any circuit configuration
needed to meet special customer requirements. Custom circuit designs can be easily achieved with a modest
set up charge. Military screening available on all units.
Electrical Data
Resistance
Schematic Range
(Ω)
10 - 49.9
Absolute
Tolerance
F, G, J
50.0 - 199
F, G, J
A
200 - 999 B, D, F, G, J
1.0K - 400K B, D, F, G, J
50 - 149
B, D, F, G, J
150 - 499 B, D, F, G, J
B
500 - 999 B, D, F, G, J
1.0K - 200K B, D, F, G, J
Optional
Ratio
Tolerance
F, G
D, F, G
A, B, D, F, G
A, B, D, F, G
B, D, F, G
B, D, F, G
B, D, F, G
B, D, F, G
Absolute TCR
(ppm/°C)
±50; ±100; ±300
±25; ±50; ±100; ±300
±25; ±50; ±100; ±300
±25; ±50; ±100; ±300
±300; ±100
±300; ±100; ±50
±25; ±50; ±100; ±300
±25; ±50; ±100; ±300
Tracking TCR
(ppm/°C)
±20
±10
±5
±5
±50
±20
±5
±5
Element
Power
(mW)
200
100
Package Specification Data
Schematic
A
B
Package Power (W)
8-pin
0.8
0.7
14-pin 16-pin
1.4 1.6
1.3 1.5
Voltage Rating
_____
√ PxR not to
exceed 100V
Temperature
Range
-55°C to +150°C
Substrate
99.5% Alumina
Custom circuits and special testing available. *Contact factory for values below 200Ω.
Lead Finish
Options
Sn/Pb solder plate
100% matte tin plate
Noise
<-30dB
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
M900 Series Issue January 2009 Sheet 1 of 3