CCN Datasheet, PDF (1/4 Pages) IRC - a TT electronics Company. – TaNFilm® Chip Carrier Resistor Network

TaNFilm^® Chip Carrier
Resistor Network
CCN Series
• Qualified to DESC 87016 and 87017 military specifications
• Gold, Sn/Pb and RoHS compliant terminations available
• Ideal for all reflow soldering techniques
• Meet JEDEC standard for type 'C' package
• Custom schematics readily available
• Absolute TCR to ±15 ppm/°C
The IRC TaNFilm^® Chip Carrier Network offers higher lead density, increased component count, lower installed
resistor cost, better reliability, and is ideal for use with all surface mount solder techniques. In addition, the TaNFilm^®
leadless CCN provides all the unique qualities of our other TaNFilm^® package configurations. Testing has demon-
strated performance exceeding MIL-PRF-914 Characteristic H.
Precise state-of-the-art laser trimming provides close tolerances and tight ratios. The TaNFilm^® process enables
IRC to manufacture custom circuit configurations and multiple resistance values without sacrificing the tightest toler-
ance and tracking characteristics of precision networks. The Tantalum Nitride resistor material is passivated for
environmental protection surpassing military requirements and guaranteeing exceptional ratio stability.
For applications requiring a high degree of reliability, stability, accuracy and low noise, plus the advantages of new
resistor configurations, specify the IRC Leadless Chip Carrier Configuration Resistor Network.
Electrical Data
Resistance Range
10Ω to 300KΩ
Absolute Resistance Tolerance
To ±0.1%
Ratio Tolerance to R1
to ±0.01%
Power Rating @ 70°C
0.1 watt/resistor, 1.0 watt/network
Operating Temperature Range
-55°C to +150°C
Absolute TCR
To ±15ppm/°C
TCR Tracking
To ±5 ppm/°C
Noise
Termination Options
(nickel leach barrier)
Substrate Material
Construction
Custom circuits and special testing available.
Less than -25 dB
Gold
60/40 Sn/Pb
100% matte-tin
99.5% pure alumina substrate
Epoxy overcoat (78xx)
Ceramic lid (79xx)
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
CCN Series Issue April 2009 Sheet 1 of 4