1900HT Datasheet, PDF (1/3 Pages) IRC - a TT electronics Company. – TaNFilm® High Temperature DIP and SIP Networks

TaNFilm^® High Temperature
DIP and SIP Networks
1900HT / 4700HT SERIES
· Inherent reliability
· Custom configurations available
· Bonded leads not susceptible to solder reflow problems
· Absolute tolerence to ±0.1% - ratio accuracy to ±0.05%
· Absolute TCR to ±25 ppm/°C - ratio tracking to ±5ppm/°C
IRC Advanced Film Division
Ceramic sandwich construction with
high temperature epoxy encapsulent
Sputtered tantalum
nitride with passivation
oxide layer
Thermo-compression
bonded leads provide
exceptional reliability
The IRC 1900HT and 4700HT Series is the ultimate combination of precision performance, reliability, and long term stability in a low
profile, TaNFilm^® DIP and SIP packages. The rugged welded lead construction combined with the inherent passivation characteristics
of tantalum nitride film insure superior continuous performance in high temperature applications over the installed life of the part.
Electrical Data
Package
Type
DIP
SIP
Size Schematic
Ohmic
Range
Package
Power
Element
Power
Rated Voltage
(not to exceed
rated power)
Isolated
Schematic A
100Ω to 100KΩ
14
1.12W
Bussed
Schematic B
1.00KΩ to 50KΩ
Isolated
Schematic A
100Ω to 100KΩ
16
1.28W
Bussed
Schematic B
1.00KΩ to 50KΩ
Isolated
Schematic G
50Ω to 50KΩ
6
0.24W
Bussed
Schematic C
2.00KΩ to 25KΩ
Isolated
Schematic G
50Ω to 50KΩ
8
0.32W
Bussed
Schematic C
2.00KΩ to 25KΩ
0.08W
0.08W
100V
50V
Temperature
Range
-55°C to +200°C
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
© IRC Advanced Film Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: [phone] • Facsimile: 361 992 3377 • Website: www.irctt.com
A subsidiary of
TT electronics plc
HT Series Issue November 2008 Sheet 1 of 3