LSMEXT-5.0V Datasheet, PDF (1/2 Pages) IQD Frequency Products Ltd – Crystal Clock Oscillator Specification

ISSUE 1; April 2016
Description
The LSM oscillator has the highest accuracy, stability and the
lowest current of all STATEK surface mount oscillators. The
design consists of a STATEK crystal, and a CMOS-compatible
integrated circuit. The hybrid design is hermetically-sealed with
a kovar lid in a surface mount
ceramic package. Permanent precision tuning of the oscillator
is accomplished by laser trimming the crystal.
-SM1 Gold Plated (RoHS)
-SM5 Solder Dipped (RoHS)
Please note that all data is only valid at 25°C unless otherwise
stated.
Frequency Parameters
Frequency
700.0kHz to 2.1MHz
Frequency Tolerance
±100.00ppm to ±1,000.00ppm
Tolerance Condition
@ 25°C
Ageing
±10ppm max per year
Frequency Stability (over 0°C to 70°C): -0.12% typ, -0.017%
max
Note: Does not include Frequency Tolerance. Positive
variations are much smaller.
Note: Other Frequency Tolerances are available - please
contact an IQD Sales Office
Voltage Coefficient: ±5ppm/V max
Load Variation (±10% change): ±1ppm max
Electrical Parameters
Supply Voltage
5.0V ±10%
Absolute Maximum Supply Voltage: 3.3V to 7V
Start-Up Time: 20ms typ
Operating Temperature Ranges
-10 to 70°C
-40 to 85°C
-55 to 125°C
Output Details
Output Compatability
Drive Capability
CMOS
10pF//10MΩ
Output Levels
VoL: 10%Vs max
VoH: 90%Vs min
Environmental Parameters
Shock: 750G, 0.3ms, 1/2 sine
Vibration: 10G rms, 10-2000Hz
Storage Temperature Range: -55 to 125°C
Manufacturing Details
Maximum Process Temperature: 260°C for 20sec max
Crystal Clock Oscillator Specification
LSM EXT 5.0V
Outline (mm) -SM1 = Gold Plated (RoHS)
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 27 Apr 16 16:14 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 2