LSCHG-5 Datasheet, PDF (1/2 Pages) IQD Frequency Products Ltd – Crystal Clock Oscillator Specification

ISSUE 1; April 2016
Description
Hermetically sealed high shock, low current clock oscillator
Available in tight frequency tolerances, consist of a Statek
miniature quartz crystal and a CMOS/TTL compatible hybrid
circuit in a ceramic package
Each crystal used in the LSCHG oscillator is pre-qualified
before assembly through electrical tests and characterization
over temperature
SM1 Gold Plated (RoHS)
SM5 Solder Dipped (RoHS)
Please note that all data is only valid at 25°C unless otherwise
stated.
Frequency Parameters
Frequency
100.0kHz
Frequency Tolerance
±100.00ppm
Ageing
±3ppm max per year
Supply Voltage Variation: ±3ppm/V max
Load Variation (ref ±10% change): ±1ppm max
Electrical Parameters
Supply Voltage
5.0V ±10%
Absolute Maximum Supply Voltage Range: -0.5V to 7V
Operating Temperature Ranges
-10 to 70°C
-40 to 85°C
-55 to 125°C
Output Details
Output Compatability
Drive Capability
Output Levels:
VoH 4.8V min
VoL 0.2V max
CMOS
15pF//10MΩ
Environmental Parameters
Storage Temperature Range: -55 to 125°C
Shock: Up to 50,000G peak, 1ms, 1/2 sine
Vibration: 10G RMS, 10-2000Hz
Manufacturing Details
Process Temperature: 260°C for 20sec max
Crystal Clock Oscillator Specification
LSCHG-5
Outline (mm) SM1 = Gold Plated (RoHS)
Wave Form
Solder Pad Layout
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 28 Apr 16 12:35 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 2