LSCHG-3 Datasheet, PDF (1/2 Pages) IQD Frequency Products Ltd – Crystal Clock Oscillator Specification

ISSUE 1; April 2016
Description
Statek’s high shock, low current LSCHG oscillators, available
in tight frequency tolerances, consist of a Statek miniature
quartz crystal and a CMOS/TTL compatible hybrid circuit in a
ceramic package. Each crystal used in the LSCHG oscillator is
pre-qualified before assembly through electrical tests and
characterisation over temperature.
SM1 Gold Plated (RoHS)
SM5 Solder Dipped (RoHS)
Please note that all data is only valid at 25°C unless otherwise
stated.
Frequency Parameters
Frequency
100.0kHz to 200.0kHz
Frequency Tolerance
±100.00ppm
Ageing
+/-3ppm max per year
Please Note: The frequency stability does not include the
calibration tolerance. Positive variations may be small
compared to negative variation.
Supply Voltage Variation: ±3ppm/V max
Load Variation: ±1ppm max ref 10% change in load
Electrical Parameters
Supply Voltage
3.3V ±10%
Please Note: Lower voltages and calibration tolerances tighter
than 100ppm many be availible, please contact one of our
sales offices.
Absolute Maximum Supply Voltage Range: -0.5V to 7V
Operating Temperature Ranges
-10 to 70°C
-40 to 85°C
-55 to 125°C
Output Details
Output Compatability
Drive Capability
Output Levels:
VoH 2.8V min
VoL 0.2V max
CMOS
15pF
Environmental Parameters
Storage Temperature Range: -55 to 125°C
Shock: up to 50,000G peak 1ms, half sine
Vibration: 10G rms, 10-2000Hz
Manufacturing Details
Process Temperature: 260°C for 20sec max
Crystal Clock Oscillator Specification
LSCHG-3
Outline (mm) SM1 = Gold Plated (RoHS)
Wave Form
Suggested Land Pattern
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 27 Apr 16 11:16 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 2