IQXV-30 Datasheet, PDF (1/2 Pages) IQD Frequency Products Ltd – VCXO Specification

VCXO Specification
IQXV-30
ISSUE 1; July 2016
Description
LVDS output Voltage Controlled Crystal Oscillator
Wide pulling range of ±100ppm min
Ceramic package with a sealed metal lid, hermetically sealed
Frequency Parameters
Frequency
Frequency Stability
Ageing
9.5MHz to 622.08MHz
±20.00ppm to ±100.00ppm
±3ppm max per year @ 25°C
Electrical Parameters
Supply Voltage
Start up time: 10ms max
Frequency Adjustment
Pulling
Control Voltage
Input Impedence
Linearity: ±10% max
Operating Temperature Ranges
0 to 70°C
-40 to 85°C
3.3V ±5%
±100ppm min
1.65V ±1.65V
<80MHz 60kΩ typ, ≥80MHz 2MΩ min
Output Details
Output Compatability
LVDS
Drive Capability
100Ω
Output Voltage Logic Low 1.1V max
Output Voltage Logic High 1.4V min
Differential Output Voltage: 247 to 454mV, 350mV typ
Offset Voltage: 1.125 to 1.375V, 1.2V typ
Output Control
Tri-State:
Logic '1' to pad 2 (70%Vs min) enables oscillator output
Logic '0' to pad 2 (30%Vs max) disables oscillator output,
oscillator goes to the high impedance state
No connection to pad 2, enables oscillator output
Outline (mm)
Noise Parameters
Phase Jitter (12kHz to 20MHz):
9.5 to <80MHz 1ps max
80 to 622.08MHz 4ps max
Environmental Parameters
Storage Temperature Range: -55 to 125°C
Drop: 120cm drop (3 times) onto hard wooden board
Vibration: MIL-STD-883, Method 2007, Test Condition A:
10Hz-55Hz-10Hz, 1.5mm amplitude, full sine, 2min per cycle,
3 mutually perpendicular planes, 2hrs duration in each plane
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 21 Jul 16 14:52 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 2