IQXP-10 Datasheet, PDF (1/2 Pages) IQD Frequency Products Ltd – Fast Make Oscillator Specification

ISSUE 1; October 2015
Description
PLL based, one time only factory programmable for a fast lead
time
A SMD crystal oscillator in a hermetically sealed ceramic
package with a metal lid
See IQXO-690 for our standard crystal oscillator alternative
Frequency Parameters
Frequency
1.0MHz to 200.0MHz
Frequency Stability
±25.00ppm
Ageing: ±5ppm max in 1st year @ 25°C
Electrical Parameters
Supply Voltage
3.3V ±0.3V
Operating Temperature Ranges
-40 to 85°C
Output Details
Output Compatability
Drive Capability
Output Voltage VoH: Vs - 1.025V
Output Voltage VoL: Vs - 1.620V
LVPECL
50Ω terminated to Vs-2.0V
Output Control
Tri-state Operation (CMOS):
Logic ‘1’ to pin 1 enables oscillator output
Logic ‘0’ to pin 1 disables oscillator output; when disabled the
oscillator output goes to the high impedance state
No connection to pin 1 enables oscillator output
Noise Parameters
Period Jitter: 10ps rms max
Environmental Parameters
Storage Temperature Range: –55 to 125°C
Ordering Information
Frequency*
Model*
Output Compatibility
Frequency Stability (over operating temperature range)*
Operating Temperature Range*
Supply Voltage
(*minimum required)
Example
100.0MHz IQXP-10
LVPECL ±25ppm –40 to 85C 3.3V
Compliance
RoHS Status (2011/65/EU)
REACh Status
MSL Rating (JDEC-STD-033):
Compliant
Compliant
Not Applicable
Fast Make Oscillator Specification
IQXP-10
Outline (mm)
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 28 Apr 16 12:46 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 2