IQXO-984 Datasheet, PDF (1/2 Pages) IQD Frequency Products Ltd – Crystal Clock Oscillator Specification

ISSUE 1; August 2016
Description
1.6 x 1.2mm crystal oscillator in a ceramic package with a
seam sealed metal lid, hermetically sealed.
Frequency Parameters
Frequency
32.768kHz
Frequency Stability
±30.00ppm to ±100.00ppm
Frequency Stability: Includes Frequency Tolerance @ 25°C,
operating temperature range, supply voltage variation and load
variation.
Electrical Parameters
Supply Voltage
3.3V ±10%
Operating Temperature Ranges
-20 to 70°C
-40 to 85°C
Output Details
Output Compatability
Drive Capability
Output Voltage Levels:
Output Low (VoL): 10%Vs max
Output High (VoH): 90%Vs min
Start Up Time: 7ms max
CMOS
15pF max
Output Control
Stand-by Mode:
Logic '0' (30%Vs max) to pad 1 disables the oscillator output,
the output goes to a high impedance state.
Logic '1' (70%Vs min) or no connection to pad 1 enables
oscillator output.
Stand-by Current: 1.4μA typical 3μA max
Environmental Parameters
Storage Temperature Range: –40 to 85°C
Ordering Information
Frequency
Model*
Output
Frequency Stability*
Operating Temperature Range*
Supply Voltage
(*minimum required)
Example
32.768kHz IQXO-984
CMOS ±50ppm –20 to 70C 3.3V
Compliance
RoHS Status (2011/65/EU)
REACh Status
MSL Rating (JDEC-STD-033):
Compliant
Compliant
Not Applicable
Crystal Clock Oscillator Specification
IQXO-984
Outline (mm)
Test Circuit
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 31 Aug 16 16:08 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 2