IQXO-90 Datasheet, PDF (1/3 Pages) IQD Frequency Products Ltd – Selectable output frequencies (Up to 4)

ISSUE 1; May 2016
Description
The IQXV-90 selectable VCXO combines low RMS phase jitter
and low power with the ability to select the output frequency
from up to four factory-configured frequencies by controlling
two Frequency Select (FS) pins (e.g. 122.88 or 153.6MHz).
This enables reductions in part count and built-in upgrade
paths to increase design flexibility and reduce costs.
Applications:
Base stations
Consumer
Communications
DSL/ADSL
Ethernet
Wi-Fi
WiMAX/W-LAN
Features:
Selectable output frequencies (Up to 4)
Low power differential outputs
<1ps integrated RMS phase jitter (12kHz to 20MHz)
Wide frequency range
CMOS, LVPECL, LVDS output options
Frequency Parameters
Frequency
8.0MHz to 1.5GHz
Frequency Stability
±10.00ppm to ±20.00ppm
Frequency Control Selection Function:
Frequency 1: FS1=0, FS2=0
Frequency 2: FS1=1, FS2=0
Frequency 3: FS1=0, FS2=1
Frequency 4: FS1=1, FS2=1
Frequency Stability (including tolerance, temperature range,
supply voltage variation, load variation and 10 years ageing at
25°C)
Electrical Parameters
Supply Voltage Options:
2.5V ±5%
3.3V ±10%
Supply Current:
CMOS 30mA max
LVPECL 65mA max
LVDS 40mA max
Frequency Adjustment
Pulling
±50ppm min APR
Voltage Control:
Absolute Pull Range: (APR) ±50ppm min
Total Pull Range: (Frequency shift from minimum to
maximum control voltage): 50 to 250ppm max
Control Voltage (Nominal 1.65V): 0 to 3.3V
Linearity (Control voltage 0.3 to 3V): 10% max
Slope: Positive only
Modulation BW (Control voltage 0.3 to 3V): 10kHz min
Input Impedance: 1MΩ min
Operating Temperature Ranges
-40 to 85°C
VCXO Specification
IQXV-90
Outline (mm) 1.6mm package height
Outline (mm) 1.6mm package height
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 12 May 16 12:24 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 3