IQXO-823 Datasheet, PDF (1/2 Pages) IQD Frequency Products Ltd – Crystal Clock Oscillator Specification

ISSUE 1; March 2016
Description
Simple package crystal oscillator in a hermetically sealed
14-pin DIL package with tri-state function
Frequency Parameters
Frequency
Frequency Stability
Ageing
1.0MHz to 166.0MHz
±25.00ppm to ±100.00ppm
±5ppm max in 1st yr @ 25°C
Electrical Parameters
Supply Voltage
3.3V ±10%
Operating Temperature Ranges
-10 to 70°C
-40 to 85°C
Output Details
Output Compatability
HCMOS
Drive Capability
1.0MHz to 40.0MHz
40.0MHz to 80.0MHz
80.0MHz to 166.0MHz
50pF
30pF
15pF
Output Control
Tri-state Operation:
Logic '1' to pin 1 enables oscillator output
Logic '0' to pin 1 disables oscillator output, the oscillator output
goes to a high impedance state
No connection to pin 1 enables oscillator output
Start Up Time: 10ms max
Output Levels
VoL: 10% Vs max
VoH: 90% Vs min
Noise Parameters
Phase Jitter (12kHz-20MHz): 1ps rms max
Environmental Parameters
Shock: 1500G, 0.5ms, 5 times in each of 6 directions, along 3
mutually perpendicular planes
Vibration: 20G (20Hz-2000Hz), 1.5mm amplitude, cross-over
frequency 80Hz, in 3 mutually perpendicular planes
Storage Temperature Range: -55 to 125°C
Ordering Information
Frequency*
Model*
Frequency Stability (over operating temperature range)*
Operating Temperature Range*
Supply Voltage
(*minimum required)
Example
20.0MHz IQXO-823
HCMOS ±50ppm -40 to 85C 3.3V
Crystal Clock Oscillator Specification
IQXO-823
Outline (mm)
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 27 Apr 16 10:33 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 2