IQXO-660 Datasheet, PDF (1/2 Pages) IQD Frequency Products Ltd – Crystal Clock Oscillator Specification

ISSUE 2; April 2016
Description
LVDS output crystal oscillator using a high frequency
fundamental crystal to give very low jitter. Hermetically sealed
ceramic package with a seam sealed metal lid. Replacement
for model CFPS-60. For higher frequencies please see our
IQXO-710 model.
Frequency Parameters
Frequency
Frequency Stability
Ageing
15.0MHz to 160.0MHz
±25.00ppm to ±100.00ppm
±3ppm max per year at 25°C
Electrical Parameters
Supply Voltage
3.3V ±5%
Operating Temperature Ranges
-10 to 70°C
-40 to 85°C
Output Details
Output Compatability
LVDS
Drive Capability
100Ω
Differential Output Voltage (VoD): 0.247V min, 0.330V typ,
0.454V max.
Offset Voltage (VOS): 1.125V min, 1.250V typ, 1.375V max.
Output Voltage Levels:
Output Low (VoL): 0.9V min
Output High (VoH): 1.6V max
Output Control
Enable/Disable:
Logic ‘1’ (≥70% Vs) to pad 1 enables oscillator output.
Logic ‘0’ (≤30% Vs) to pad 1 disables oscillator output; when
disabled the oscillator output goes to the high impedance
state.
No connection to pad 1 enables oscillator output.
Standby Current: 10µA max
Noise Parameters
Phase Jitter (12kHz to 20MHz): 1ps rms max
Environmental Parameters
Storage Temperature Range: -55 to 125°C
Shock: MIL-STD-202, Method 213, Condition E: 1000G,
0.5ms, half sine wave.
Vibration: MIL-STD-883, Method 2007, Condition A: 20G
Ordering Information
Frequency*
Model*
Output
Frequency Stability (over operating temperature range)*
Operating Temperature Range*
Supply Voltage
(*minimum required)
Example
100.0MHz IQXO-660
LVDS ±50ppm –10 to 70C 3.3V
Crystal Clock Oscillator Specification
IQXO-660
Outline (mm)
Test Circuit
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 28 Apr 16 12:41 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 2