IQXO-621 Datasheet, PDF (1/2 Pages) IQD Frequency Products Ltd – Crystal Clock Oscillator Specification

Crystal Clock Oscillator Specification
IQXO-621
ISSUE 3; April 2016
Description
LVPECL output crystal oscillator using a high frequency
fundamental crystal to give very low jitter. Hermetically sealed
ceramic package with a seam sealed metal lid. Replacement
for model CFPS-59.
Frequency Parameters
Frequency
Frequency Stability
Ageing
15.0MHz to 160.0MHz
±25.00ppm to ±100.00ppm
±3ppm max per year @ 25°C
Electrical Parameters
Supply Voltage
2.5V ±5%
Operating Temperature Ranges
-10 to 70°C
-40 to 85°C
Output Details
Output Compatability
Drive Capability
Output Voltage Levels:
Output Low (VoL): 1.095V max
Output High (VoH): 1.475V min
LVPECL
50Ω terminated to Vs-2.0V
Output Control
Enable/Disable:
Logic ‘1’ (70% Vs min) to pad 1 enables oscillator output.
Logic ‘0’ (30% Vs max) to pad 1 disables oscillator output; the
oscillator output goes to the high impedance state.
No connection to pad 1 enables oscillator output.
Standby Current: 10μA max
Noise Parameters
Phase Jitter (12kHz to 20MHz): 1ps rms max
Environmental Parameters
Storage Temperature Range: –55 to 125°C
Shock: MIL-STD-202, Method 213, Condition E: 1000G,
0.5ms, half sine wave.
Vibration: MIL-STD-883, Method 2007, Condition A: 20G
Ordering Information
Frequency*
Model*
Output
Frequency Stability (over operating temperature range)*
Operating Temperature Range*
Supply Voltage
(*minimum required)
Example
100.0MHz IQXO-621
LVPECL ±50ppm –10 to 70C 2.5V
Compliance
RoHS Status (2011/65/EU)
REACh Status
MSL Rating (JDEC-STD-033):
Compliant
Compliant
Not Applicable
Outline (mm)
Test Circuit
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 27 Apr 16 11:04 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 2