IQOV-200F Datasheet, PDF (1/2 Pages) IQD Frequency Products Ltd – OCXO Specification

ISSUE 1; September 2016
Description
Please note: This document is intended to illustrate the
general capability and versatility of IQD’s design. For specific
enquiries please contact one of IQD’s sales offices where we
can tailor a unique specification to meet your needs.
- Hermetically sealed Oven Controlled Crystal Oscillator
(OCXO)
in industry standard case style
- Ultra low phase noise
- Tight temperature stability
- Voltage controlled frequency adjustment optional
Frequency Parameters
Frequency
Frequency Stability
80.0MHz to 130.0MHz
±50.00ppb
Electrical Parameters
Supply Voltage
12.0V ±5%
Power Consumption:
During warm up: 350mA max (warm up time 5mins max)
At 25°C, after warm up: 150mA max
Operating Temperature Ranges
-20 to 70°C
Output Details
Output Compatability
Sinewave
Drive Capability
50Ω
Output Power: +13dBm into 50Ω
Output Control
Pulling Example (optional):
Pulling Range: ±2ppm min
Control Voltage: 2.5V ±2.5V
Noise Parameters
Phase Noise (typical figures @ 100.0MHz, 12.0V supply and
sinewave):
-95dBc/Hz @ 10Hz
-130dBc/Hz @ 100Hz
-160dBc/Hz @ 1kHz
-175dBc/Hz @ 10kHz
-180dBc/Hz @ 100kHz
-182dBc/Hz @ 1MHz
Note: We are at an advanced stage of further development on
the close-in phase noise and expect to be able to offer
improved performance in this area in the near future.
Environmental Parameters
Shock: IEC 60068-2-27, Test Ea (CECC 69000, clause 4.6.8):
100G, 6ms duration, 3 times in each of 3 mutually
perpendicular planes
Vibration (Sinusoidal): IEC 60068-2-6, Test Fc (CECC 69000,
clause 4.6.7): 10Hz-55Hz 0.75mm displacement, 55Hz-200Hz
10G acceleration, 30mins in each of 3 mutually perpendicular
planes
OCXO Specification
IQOV-200F
Outline (mm)
Phase Noise @ 100.0MHz
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 2 Sep 16 11:53 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 2