CXOMKHTS-5.0V Datasheet, PDF (1/3 Pages) IQD Frequency Products Ltd – Crystal Clock Oscillator Specification

ISSUE 1; May 2016
Description
For high temperature, high stability and fast start-up
applications IQD offers the AT-cut crystal-based 32.768kHz
CXOMKHTS 5 volt Statek oscillator. This oscillator is
designed to operate at temperatures up to 200°C. A high
shock version is also offered that features 10000G shock
survivability. Other features include fast start-up time (0.8ms
typical) and low current operation (500µA at 25°C).
-SM1 SM1 (Gold Plated, RoHS compliant)
-SM5 SM5 (Solder Dipped, RoHS compliant)
Please note that all data is only valid at 25°C unless otherwise
stated.
Frequency Parameters
Frequency
32.768kHz
Frequency Tolerance
±100.00ppm
Tolerance Condition
@ 25°C
Frequency Stability
±100.00ppm to ±175.00ppm
Ageing
±10ppm max in 1st year @
25°C
Ageing (1000hrs): ±100pm max @ 200°C
Electrical Parameters
Supply Voltage
5.0V ±10%
Supply Current: 500µA typ
Supply Voltage (absolute maximum rating): -0.3V to 5.5V
Operable Temperature Range: -55 to 200°C
Expected Life @ 200°C: 1500hrs min
Operating Temperature Ranges
25 to 150°C
25 to 175°C
25 to 200°C
Output Details
Output Compatability
Drive Capability
Start Up Tme: 0.8ms typ
Rise Time: 85ns typ
Fall Time: 45ns typ
CMOS
15pF
Output Control
Enable/Disable (EN):
Logic 1 to pad 1, output enabled
Logic 0 to pad 1, output disabled, output goes to high
impedance state, current consumption very low, internal
oscillator stops
When pad 1 is allowed to float, it is held by an internal pull-up
resistor
No Connection (NC): Pad 1 No Connection
Crystal Clock Oscillator Specification
CXOMKHTS 5.0V
Outline (mm) -SM1 = SM1 (Gold Plated, RoHS
compliant)
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 16 Jun 16 10:34 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 3