CFPS-113 Datasheet, PDF (1/2 Pages) IQD Frequency Products Ltd – Crystal Clock Oscillator Specification

ISSUE 4; April 2016
Description
Low phase noise crystal oscillator
Ceramic package with a seam sealed metal lid, hermetically
sealed.
Frequency Parameters
Frequency
Frequency Stability
Ageing
26.0MHz to 44.0MHz
±30.00ppm to ±100.00ppm
±5ppm max per year
Electrical Parameters
Supply Voltage
2.5V ±5%
Operating Temperature Ranges
-20 to 70°C
-40 to 85°C
Output Details
Output Compatability
CMOS
Drive Capability
15pF
Logic ‘1’ (>80%VS) to pad 1 enables oscillator output
Logic ‘0’ (<20% VS) to pad 1 disables oscillator output; when
disabled the oscillator output goes to the high impedance state
No connection to pad 1 enables oscillator output
Noise Parameters
Phase Noise typical figures (dBc/Hz):
Frequency 10Hz 100Hz 1kHz
40MHz
-80 -116 –145
27MHz
-75 -111 –146
10kHz 100kHz
–157 –159
–155 –157
Environmental Parameters
Drop: 100cm drop (3 times) onto hard wooden board
Vibration: 10Hz-36Hz, 1.5mm amplitude, 36Hz-55Hz, 4G
sweep time 1min/oct, 2hrs in 3 mutually perpendicular planes
Storage Temperature Range: –55 to 100°C
Ordering Information
Frequency*
Model*
Output
Frequency Stability*
Operating Temperature Range*
Supply Voltage
Example
30.0MHz CFPS-113
CMOS ±50ppm –20 to 70C 2.5V
Compliance
RoHS Status (2011/65/EU)
REACh Status
MSL Rating (JDEC-STD-033):
Compliant
Compliant
Not Applicable
Crystal Clock Oscillator Specification
CFPS-113
Outline (mm)
Test Circuit
Sales Office Contact Details:
UK: [phone]
Germany: 0800 1808 443
France: 0800 901 383
USA: +1.760.318.2824
Printed on 31 Aug 16 11:04 using Model Data Sheet V1.2550
Email: [e-mail]
Web: www.iqdfrequencyproducts.com
Page 1 of 2