W2530-12S5 Datasheet, PDF (1/1 Pages) Intronics Power, Inc. – DC/DC MODULES

W2530 SERIES
DC/DC MODULES
Applications
• Servers, Switches and Data Storage • Networking Gear
• Wireless Communications
• Data Communications
• Distributed Power Architecture
• Telecommunications
• Semiconductor Test Equipment
• Industrial / Medical
The W2530 Familiy of high efficiency DC/DC converters offer power levels of up to 30 Watt, which exceeds that of other bricks with the same Industry-Standard Pinouts, while providing smaller
footprints. With a wide input voltage range and single and multi-outputs, these converters provide versatility without sacrificing the board space. All models feature an input Pi filter and short circuit
protection. The fully enclosed, encapsulated construction achieves very efficient heat transfer with no hot spots. All converters combine creative design practices with highly derated power devices
to achieve very high reliability, high performance and low cost solution to systems designers.
Specifications & Features Summary
Input Specifications
SPECIFICATIONS
• 500V, 10MΩ input-to-output isolation
• No airflow or heatsink required
• Enclosed six-sided metal shield construction for low EMI/RFI
• Efficiency to 85%
Input Voltage Range
Input Filter
12V----------9-18V
24V--------18-36V
48V--------36-72V
Pi Type
• 2:1 Input Range
Output Specifications
• Pi Input Filter
Voltage Accuracy
• Continuous Short Circuit Protection
• Remote On/Off Control
Approval Pending
• Delivers up to 30W in 2”x2” package with Industry-Standard Pinouts
Model Num
W2530-12S5
W2530-12S12
W2530-12S15
W2530-12D5
W2530-12D12
VIn
9-18 VDC
9-18 VDC
9-18 VDC
9-18 VDC
9-18 VDC
VOut
5.0 VDC
12.0 VDC
15.0 VDC
±5.0 VDC
±12.0 VDC
IOut
5.0A
2.5A
2.0A
±2.5A
±1.25A
INo Load
30.0 mA
30.0 mA
30.0 mA
35.0 mA
35.0 mA
IFull Load
2675.0 mA
3050.0 mA
3050.0 mA
2675.0 mA
3050.0 mA
Eff Case
78% W2530
82% W2530
82% W2530
78% W2530
82% W2530
Single Output
Dual+Output
-Output
Triple, 5V
12V / 15V
Voltage Balance(Dual)
Transient Response:
Single, 25% Step Load Change
Dual,FL-1/2L +/- 1% Error Band
+/-2.0% max.
+/-2.0% max.
+/-3.0% max.
+/-2.0% max.
+/-5.0% max.
+/-1.0% max.
<500u sec.
<500u sec.
W2530-12D15 9-18 VDC
±15.0 VDC
±1.0A
35.0 mA 3050.0 mA 82% W2530
W2530-12T5-12 9-18 VDC ±12.0/5.0 VDC ±0.31A/3.5A 35.0 mA 2640.0 mA 79% W2530
W2530-12T5-15 9-18 VDC ±15.0/5.0 VDC ±0.25A/3.5A 35.0 mA 2640.0 mA 79% W2530
W2530-12S3.3 9-18 VDC
3.3 VDC
5.0A
30.0 mA 1860.0 mA 74% W2530
W2530-24S5
18-36 VDC
5.0 VDC
5.0A
30.0 mA 1336.0 mA 79% W2530
W2530-24S12 18-36 VDC
12.0 VDC
2.5A
30.0 mA 1525.0 mA 82% W2530
W2530-24S15 18-36 VDC
15.0 VDC
2.0A
30.0 mA 1525.0 mA 82% W2530
W2530-24D5 18-36 VDC
±5.0 VDC
±2.5A
30.0 mA 1336.0 mA 79% W2530
W2530-24D12 18-36 VDC
±12.0 VDC
±1.25A
30.0 mA 1470.0 mA 85% W2530
W2530-24D15 18-36 VDC
±15.0 VDC
±1.0A
30.0 mA 1470.0 mA 85% W2530
W2530-24T5-12 18-36 VDC ±12.0/5.0 VDC ±0.31A/3.5A 30.0 mA 1320.0 mA 80% W2530
W2530-24T5-15 18-36 VDC ±15.0/5.0 VDC ±0.25A/3.5A 30.0 mA 1320.0 mA 80% W2530
W2530-24S3.3 18-36 VDC
3.3 VDC
5.0A
30.0 mA 920.0 mA 75% W2530
W2530-48S5
36-72 VDC
5.0 VDC
5.0A
20.0 mA 660.0 mA 79% W2530
W2530-48S12 36-72 VDC
12.0 VDC
2.5A
20.0 mA 765.0 mA 82% W2530
W2530-48S15 36-72 VDC
15.0 VDC
2.0A
20.0 mA 765.0 mA 82% W2530
W2530-48D5 36-72 VDC
±5.0 VDC
±2.5A
25.0 mA 660.0 mA 79% W2530
W2530-48D12 36-72 VDC
±12.0 VDC
±1.25A
25.0 mA 735.0 mA 85% W2530
W2530-48D15 36-72 VDC
±15.0 VDC
±1.0A
25.0 mA 735.0 mA 85% W2530
W2530-48T5-12 36-72 VDC ±12.0/5.0 VDC ±0.31A/3.5A 25.0 mA 655.0 mA 80% W2530
W2530-48T5-15 36-72 VDC ±15.0/5.0 VDC ±0.25A/3.5A 25.0 mA 655.0 mA 80% W2530
W2530-48S3.3 36-72 VDC
3.3 VDC
5.0A
20.0 mA 460.0 mA 75% W2530
Typical at Ta= +25 ºC under nominal line voltage and 75% load conditions, unless noted. The information and specifications
contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change
without notice. Refer to product specification sheet for performance characteristics and application guidelines.
External Trim Adj. Range
Ripple and Noise, 20MHz BW
Temperature Coefficient
Short Circuit Protection
Line Regulation, Single/Dual
Triple
Load Regulation, Single/Dual
Triple
General Specifications
Efficiency
Isolation Voltage
Isolation Resistance
Switching Frequency
Case Grounding
Operating Temperature Range
Case Temperature
Cooling
Storage Temperature Range
EMI / RFI
Dimensions
Case Material
+/-10%
10mV RMS. Max.
75mV p-p max.
+/-0.02% / ^oC
Continuous
+/-0.5% max.
+/-1.0% max.
+/-1.0% max.
+/-5.0% max.
Up to 85%
500 VDC min
10⁹ ohms
300KHz, min
Capacity Coupled to Input
-25^oC to +71^oC
100^oC max.
Free-Air Convection
-55^oC to +105^oC
Six Sided Continuous Shield
2X2X0.4 Inches
(50.8X50.8X10.2mm)
Black Coated Copper w/Non-Conductive Base
Notes:
1.
Measured From High Line to Low Line
BOTTOM VIEW
W2530 FAMILY
8
2.
Measured From Full Load to 1/4 Load
The output voltage can be trimmed (±10%) using an external resistor. To trim the output up
(down) connect a resistor between pins 5 and 6 (7). A 10KΩ trim pot can also be used to make
4
3
0.60
[15.24] ^0.40
[10.16]
2
1
0.30
[7.62]
0.40
[10.16]
7
2.00
6
0.80 [50.80]
[20.32]
0.40
[10.16]
5
the output variable. Connect the wiper to pin 5 and make the other connections to pins 6 and 7.
REMOTE ON/OFF CONTROL
Logic Compatibility
EC-On
EC-Off
Shutdown Idle Current
Input Resistance
Control Common
CMOS or Open Collector TTL
>+5.5Vdc or Open Circuit
<1.8Vdc
10mA
100K ohms (Ein 0 Vdc to 9 Vdc
Referenced to Input Minus
Full output power is available at ambient temperatures of -25C to +60C with no airflow.
Above +60C output power linearly derates to 0% at +100C.
0.10
[2.54]
1.80
[45.72]
0.20
[5.08]
Consult factory for hundreds of other input / output voltage configurations
Triple Output Loading Table (1)
2.00
[50.80]
Pin # S(ingle) D(ual)
T(riple)
Voltage
Amperes
Min. (2) Nom.
0.20
[5.08]
SIDE VIEW
0.35
[8.89]
1
On/Off On/Off
On/Off
2
No Pin No Pin
No Pin
3
Vin -
Vin -
Vin -
4
Vin +
Vin +
Vin +
5
Trim
Trim
- Aux. Out +12(15) or -12(15) 0.10 0.31(0.25)
6
Vout -
Vout -
Common
7
Vout + Common +5Vout
+5
0.50
All dimensions are in inches [mm]. All pins are dia. 0.040 [1.02] Tolerances: .XX= ±0.04, .XXX= ±0.010
8
No Pin Vout + + Aux. Out +12(15) or -12(15) 0.10
• • Intronics Power Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 Phone: [phone] Fax: [phone] Rev. D
0.31(0.25)