S10-5S1.0 Datasheet, PDF (1/1 Pages) Intronics Power, Inc. – DC/DC MODULES

S SERIES
DC/DC MODULES
Applications
• Servers, Switches and Data Storage • Networking Gear
• Wireless Communications
• Data Communications
• Distributed Power Architecture
• Telecommunications
• Semiconductor Test Equipment
• Industrial / Medical
The S Families of high efficiency non-isolated DC/DC converters offer power levels of up to 80 Watt, which exceeds that of other Industry-standard SMT and Through-Hole SIPs with the same
package, while also providing ultra-wide input voltage range for 3.3Vin and 5Vin. These converters provide versatility without sacrificing the board space. All models feature an input filter and
regulated outputs. The open-frame construction facilitates maximum power delivered with the highest efficiency of up to 95%. All converters combine creative design practices with highly derated
power devices to achieve very high reliability, high performance and low cost solution to systems designers.
Specifications & Features Summary
INPUT SPECIFICATIONS
Under Voltage Lockout Power-Up/Power-Down (S10 & S15)
2.8V typ. / 2.7V typ.
• Industry Standard SIP or SMT Pinout
• High Efficiency to 95%
• Ultra-Wide Input Voltage Range
• User-Adjustable Outputs (S10-12S5, S15 & S16 Models)
• Over Temperature Protection
• Continuous Short Circuit Protection
S10-12S5
S16-12S5
Input Filter Type
Positive Remote on/off Control: Module ON
Module OFF
OUTPUT SPECIFICATIONS
Voltage Accuracy
8.0V typ. / 7.7V typ.
8.5V typ. / 8.0V typ.
Capacitive
Open Circuit or Vin High
<0.4Vdc
±1.5% max.
• Remote ON/OFF
Transient Response: 25% Step Load Change
<200u sec.
• Pending UL Approval
Ripple and Noise, 20MHz BW, Note 3
• PLEASE ADD SUFFIX “T” FOR THROUGH-HOLE PACKAGE
• PLEASE ADD SUFFIX “N” FOR NEGATIVE LOGIC CONTROL⁵
S10 / S15 - 20mV rms max. (50mV pk-pk max).
Temperature Coefficient
Short Circuit Protection
S16 - 30mV rms max.(75mV pk-pk max)
±0.03%/C max.
Continuous
MODEL
NUMBER
INPUT
VOLTAGE
OUTPUT
VOLTAGE
OUTPUT
CURRENT
INPUT CURRENT
NO
LOAD
FULL
LOAD
％
Line Regulation, Note1
EFF
PACKAGE Load Regulation, Note2
External Trim Adj. Range (S10 Family)
±0.2% max., (SMT S15 is ±0.4% max)
±0.5% max.
±10%
S10-5S1.0
S10-5S1.2
S10-5S1.5
S10-5S1.8
S10-5S2.0
S10-5S2.5
S10-5S3.3
3.0 –5.5VDC
3.0 –5.5VDC
3.0 –5.5VDC
3.0 –5.5VDC
3.0 –5.5VDC
3.0 –5.5VDC
4.5 –5.5VDC
1.0 Vdc
1.2 Vdc
1.5 Vdc
1.8 Vdc
2.0 Vdc
2.5 Vdc
3.3 Vdc
10 A
50 mA 2353mA
85
SIP / SMT ^Efficiency
10 A
50 mA 2791mA
86
SIP / SMT ^{Isolation Voltage}
10 A
50 mA 3409mA
88
SIP / SMT
Switching Frequency
Over Temperature Protection
10 A
50 mA 4000mA
90
SIP / SMT
Operating Ambient Temperature Range
10 A
60 mA 4396mA
91
SIP / SMT
10 A
60 mA 5376mA
93
SIP / SMT ^{Derating Temperature}
Storage Temperature Range
10 A
60 mA 6947mA
95
SIP / SMT
See Table
Not Isolated
300KHz typ.
120℃ typ., 130℃ for S16
-40℃ to +85℃
See Application Notes
-55℃ to +125℃
S10-12S5 8.3 –14.0VDC 0.75-5Vdc
10 A
Various Various 93 max. SIP / SMT ^{Dimensions: (Through-Hole Package) S10/S15}
2”x0.5”x0.33” (50.8x12.7x8.3 mm)
(Through-Hole Package) S10-12S5 & S16
2”x0.512”x0.327” (50.8x13.0x8.3 mm)
S15-5S3.3 3.0 –5.5VDC 0.9-3.63 Vdc
15 A
Various Various 94 max. SIP / SMT _{(SMT Package)}
1.3”x0.53”x0.366” (33.00x13.46x9.3 mm)
S16-12S5 9.0 –14.0VDC 0.75-5Vdc
16A
Various Various 94 max. SIP / SMT _Structure
Non-potted With Open Frame Type
Typical at Ta= +25 ºC under nominal input voltages of 5V and 12VDC, unless noted. The information and specifications
contained in this brief are believed to be accurate and reliable at the time of publication. Specifications are subject to change
without notice. Refer to product specification sheet for performance characteristics and application guidelines.
Consult factory for hundreds of other available input/output voltage
NOTES
1. Measured from High Line to Low Line
S15(S16) Family Vo, set =1.8(3.3)Vdc
2. Measured from Full Load to Zero Load
S15/16 Family Vo, set =3.3Vdc
3. Measured with 10uf tantalum cap & 1uf ceramic cap across output.
4. 100uf, ESR <20mΩ (S10/S15) or <100mΩ (S10-12S5/S16)Cap across Vin recommended
5. Suffix “N” to the Model Number with Negative Module ON – Open Circuit or <0.4Vdc
SMT PACKAGE S10, S15 & S16 SERIES
33.0
(1.30)
7.87 4.83 4.83 4.83 7.54
(0.310) (0.190) (0.190) (0.190) (0.297)
1.65
(0.065)
1.60
(0.063)
COM +VO TRIM +SENSE
BOTTOM VIEW
10.29 13.46
(0.405) (0.530)
+VIN
2.84
(0.112)
ON/OFF
SURFACE MOUNT CONTACT
1.22
(0.048)
1.91(0.075)
9.30
(0.366)
max.
10.29
(0.405)
0.64
(0.025)
L1 INDUCTOR
Recommended Pad Layout
Dimensions are in millimeters (inches)
7.54 4.83 4.83 4.83
7.87
(0.297) (0.190)(0.190) (0.190) (0.310)
+SENSE TRIM +VO COM
TOP VIEW
ON/OFF
+VIN
29.90
PAD SIZE:
(1.177)
Min: 3.556x2.413 (0.140x0.095)
Max: 4.19x2.79 (0.165x0.110)
S10-12S5 & S16-12S5
External Resistor Values
for programming output voltage
S15-5S3.3
External Resistor Values
for programming output voltage
10.92
(0.430)
Vo,set
(V)
0.75
1.20
1.50
1.80
2.00
2.50
3.30
5.00
Rtrim
(KΩ)
Open
22.33
13.0
9.0
7.4
5.0
3.12
1.47
Vo,set
(V)
0.90
1.00
1.20
1.50
1.80
2.00
2.50
3.30
Rtrim
(KΩ)
135.36
79.17
41.71
22.98
14.96
11.75
6.93
3.15
SIZE SIP ^{TRHOUGH – HOLE PACKAGE S10”T”, S15 & S16”T” SERIES}
S10-12S5 / S16
0.335(8.50)max. _{0.327(8.30)max.}
2.00(50.8)
0.23(5.8)
PIN CONNECTION
+VIN
Pin FUNCTION
1 +Output
C1
12 3 45
6 7 8 9 10 11
2 +Output
0.139(3.52)
0.100(2.54)
0.025(0.64)
1.000(25.40)
0.400(10.20)
0.29(7.4)
LAYOUT PA^LTT^AOT^YPE^OR_VN^UIETTO_WPP^AV^TIE^TW^ERN
All Dimmension In Inches(mm)
Tolerance :
.XX=¡ Ó0.02
Dimensions are in inches^.X(^Xm^Xil⁼lim^{¡ Ó}e⁰t^.e⁰r¹s⁰)
0.500(12.70)
3 +Sense
4 +Output
0.28(7.1)
5 Common
0.050(1.30)
COM
0.025(0.64) _{6 Common}
S10-12S5 / S16
0.512(13.0)max.
0.33(8.4)
7 +V Input
8 +V Input
9 No Pin
ON/OFF
10 Trim
1.1mm PLATED THROUGH HOLE
1.6mm PAD SIZE
11 On/Off Control
Tolerances: X.X ±0.5mm(0.02”), X.XX ±0.25mm(0.010”), unless otherwise noted.
BLOCK DIAGRAM FOR S SERIES
Q1
L1
Q2 D1
C2
PWM IC
ERR AMP
• • Intronics Power Inc. 1400 Providence Highway, Building 2, Norwood, MA 02062-5015 Phone: [phone] Fax: [phone] Rev. E
R sense
R1
R trim
R2
+VO
+SENSE
COM
TRIM