ISL76671_15 Datasheet, PDF (8/9 Pages) Intersil Corporation – Low Power, <100 Lux Optimized, Analog Output Ambient Light Sensor

ISL76671
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make sure you
have the latest revision.
DATE
REVISION
CHANGE
April 20, 2015
FN7716.3 Changed AEC Q100 to AEC-Q100
Updated ordering information on page 2 by adding T7A part and Evaluation Board.
Updated ESD Ratings in “Absolute Maximum Ratings (T_A = +25°C)” on page 3 as follows:
From: Human Body Model (Tested per JESD22-A114E). . . . . . . . . .. 3kV
Machine Model (Tested per JESD22-A115C) . . . . . . . . . . . . . . . . . . 300V
Charged Device Model (Tested per JESD22-C101E). . . . . . . . . . . . . . 1kV
Latch Up (Tested per JESD78C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mA
To: Human Body Model (Tested per AEC-Q100-002) . . . . . . . . . . . . . . 2.5kV
Machine Model (Tested per AEC-Q100-003). . . . . . . . . . . . . . . . . . . 250V
Charged Device Model (Tested per AEC-Q100-011) . . . . . . . . . . . . . 1kV
Latch-up (Tested per AEC-Q100-004, Class II, Level A) . . . . . . . . . . 100mA
Updated POD L6.2x2.1 to current rev with changes as follows:
Changed Note 5 From: Tiebar shown (if present) is a non-functional feature.
To: Tiebar shown (if present) is a non-functional feature and maybe located on any of the 4 sides (or ends).
Updated Arrows to correct arrow type
December 23, 2013
December 12, 2011
FN7716.2
FN7716.1
Updated datasheet with current Intersil standards.
Page 8
- 2nd line of the disclaimer changed from:
"Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted"
to:
"Intersil Automotive Qualified products are manufactured, assembled and tested utilizing TS16949 quality
systems as noted"
“Thermal Information” on page 3, changed from:
Pb-Free Reflow Profile (*) ...... see TB487
*Peak temperature during solder reflow +235°C max
To
Pb-Free Reflow Profile (*) ...... see TB477
*Peak temperature during solder reflow +260°C max
October 19, 2011
FN7716.0
“Electrical Specifications” on page 3:
Added Min value of 1.4V and Max value of 2.3V for V_OUT where e = 100 lux
Initial Release
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support
For additional products, see www.intersil.com/en/products.html
Intersil Automotive Qualified products are manufactured, assembled and tested utilizing TS16949 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Submit Document Feedback
8
FN7716.3
April 20, 2015