HD-15531883 Datasheet, PDF (8/8 Pages) Intersil Corporation – CMOS Manchester Encoder-Decoder

Die Characteristics
DIE DIMENSIONS:
155 x 195 x 19 ±1mils
METALLIZATION:
Type: Si-Al
Thickness: 11kÅ ±2kÅ
HD-15531/883
GLASSIVATION:
Type: SiO₂
Thickness: 8kÅ ±1kÅ
WORST CASE CURRENT DENSITY:
2.0 x 10⁵ A/cm²
Metallization Mask Layout
TAKE DATA
SERIAL DATA OUT
HD-15531/883
VALID WORD COUNT C1
DATA SYNC
TAKE DATA’
VCC
COUNT C4
ENCODER CLK
COUNT C3
SYNCHR DATA
SYNCHR DATA SEL
SYNCHR CLK
DECODER CLK
SYNCHR CLK SEL
BIPOLAR ZERO IN
BIPOLAR ONE IN
UNIPOLAR DATA IN
DECODER SHIFT CLK
TRANSITION SEL
ENCODER SHIFT CLK
SEND CLK IN
SEND DATA
ENCODER PARITY SEL
SYNC SEL
ENCODER ENABLE
SERIAL DATA IN
BIPOLAR ONE OUT
OUTPUT INHIBIT
COMMAND SYNC
DECODER COUNT MASTER COUNT
PARITY SEL
C0
RESET 2
DECODER GND
RESET
÷ 6 OUT
BIPOLAR ZERO OUT
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
177