ISL60002_10 Datasheet, PDF (7/36 Pages) Intersil Corporation – Precision Low Power FGA™ Voltage References

ISL60002
Electrical Specifications ISL60002-33, V_OUT = 3.300V Operating Conditions: V_IN = 5.0V, I_OUT = 0mA, C_OUT = 0.001µF,
T_A = -40 to +105°C, unless otherwise specified. Boldface limits apply over the operating temperature range, -40°C to +105°C
SYMBOL
PARAMETER
CONDITIONS
MIN
MAX
(Note 9) TYP (Note 9)
UNITS
V_OUT
V_OA
Output Voltage
V_OUT Accuracy (Note 10)
T_A = +25°C
ISL60002B33
3.300
V
-1.0
1.0
mV
ISL60002C33
-2.5
2.5
mV
ISL60002D33
-5.0
5.0
mV
TC V_OUT
Output Voltage Temperature
Coefficient (Note 10)
20
ppm/°C
V_IN
I_IN
ΔV_OUT/ΔV_IN
ΔV_OUT/ΔI_OUT
Input Voltage Range
Supply Current
Line Regulation
Load Regulation
ΔV_OUT/ΔT_A
ΔV_OUT/Δt
I_SC
V_N
Thermal Hysteresis (Note 11)
Long Term Stability (Note 12)
Short Circuit Current (to GND)
Output Voltage Noise
+3.5V ≤ V_IN ≤ +5.5V
0mA ≤ I_SOURCE ≤ 20mA
-20mA ≤ I_SINK ≤ 0mA
ΔT_A = +145°C
T_A = +25°C; First 1khrs
T_A = +25°C
0.1Hz ≤ f ≤ 10Hz
3.5
5.5
V
350
700
nA
80
200
µV/V
25
100
µV/mA
50
150
µV/mA
100
ppm
50
ppm
50
mA
30
µV_P-P
Common Electrical Specifications ISL60002 -10, -11, -12, -18, -20, and -25
Operating Conditions: V_IN = 3.0V, I_OUT = 0mA, C_OUT = 0.001µF, T_A = -40 to +85°C, unless otherwise specified. Boldface limits apply over the operating
temperature range, -40°C to +85°C
SYMBOL
PARAMETER
CONDITIONS
MIN
MAX
(Note 9) TYP (Note 9)
UNITS
TC V_OUT
Output Voltage Temperature
Coefficient (Note 10)
20
ppm/°C
I_IN
ΔV_OUT/ΔV_IN
ΔV_OUT/ΔI_OUT
Supply Current
Line Regulation
Load Regulation
ΔV_OUT/ΔT_A
ΔV_OUT/Δt
I_SC
Thermal Hysteresis (Note 11)
Long Term Stability (Note 12)
Short Circuit Current (to GND)
(Note 13)
+2.7V ≤ V_IN ≤ +5.5V
0mA ≤ I_SOURCE ≤ 7mA
-7mA ≤ I_SINK ≤ 0mA
ΔT_A = +125°C
T_A = +25°C; First 1khrs
T_A = +25°C
350
900
80
250
25
100
50
150
100
50
50
nA
µV/V
µV/mA
µV/mA
ppm
ppm
mA
V_N
Output Voltage Noise
0.1Hz ≤ f ≤ 10Hz
30
µV_P-P
NOTES:
9. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design.
10. Over the specified temperature range. Temperature coefficient is measured by the box method whereby the change in V_OUT is divided by the
temperature range: (-40°C to +85°C = +125°C, or -40°C to +105°C = +145°C for the ISL60002-33).
11. Thermal Hysteresis is the change in V_OUT measured @ T_A = +25°C after temperature cycling over a specified range, ΔT_A, V_OUT is read initially at
T_A = +25°C for the device under test. The device is temperature cycled and a second V_OUT measurement is taken at +25°C. The difference between
the initial V_OUT reading and the second V_OUT reading is then expressed in ppm. For ΔT_A = +125°C, the device under is cycled from +25°C to +85°C
to -40°C to +25°C, and for ΔT_A = +145°C, the device under is cycled from +25°C to +105°C to -40°C to +25°C
12. Long term drift is logarithmic in nature and diminishes over time. Drift after the first 1000 hours will be approximately 10ppm.
13. Short Circuit Current (to V_CC) for ISL60002-25 at V_IN = 5.0V and +25°C is typically around 30mA. Shorting V_OUT to V_CC is not recommended due to
risk of resetting the part.
7
FN8082.17
December 16, 2010