ICL3245ECAZ-T Datasheet, PDF (7/20 Pages) Intersil Corporation – ±15kV ESD Protected, +3V to +5.5V, 1Microamp, 1Mbps, RS-232 Transceivers

ICL3225E, ICL3227E, ICL3245E
Electrical Specifications Test Conditions: V_CC = 3V to 5.5V, C₁ - C₄ = 0.1µF; Unless Otherwise Specified.
Typicals are at T_A = 25°C (Continued)
PARAMETER
TEST CONDITIONS
TEMP
(°C) MIN
TYP
Output Resistance
Output Short-Circuit Current
V_CC = V+ = V- = 0V, Transmitter Output = ±2V
Full
300
10M
Full
-
±35
Output Leakage Current
V_OUT = ±12V, V_CC = 0V or 3V to 5.5V,
Automatic Powerdown or FORCEOFF = GND
Full
-
-
MOUSE DRIVEABILITY
Transmitter Output Voltage
T1_IN = T2_IN = GND, T3_IN = V_CC, T3_OUT Loaded with 3kΩ Full
±5
-
(See Figure 11)
to GND, T1_OUT and T2_OUT Loaded with 2.5mA Each
ENHANCED AUTOMATIC POWERDOWN (FORCEON = GND, FORCEOFF = V_CC)
Receiver Input Thresholds to
INVALID High
See Figure 6
Full
-2.7
-
Receiver Input Thresholds to
INVALID Low
See Figure 6
Full
-0.3
-
INVALID, READY Output Voltage I_OUT = 1.6mA
Low
Full
-
-
INVALID, READY Output Voltage I_OUT = -1.0mA
High
Full V_CC-0.6
-
Receiver Positive or Negative
Threshold to INVALID High Delay
(t_INVH)
Receiver Positive or Negative
Threshold to INVALID Low Delay
(t_INVL)
Receiver or Transmitter Edge to
Transmitters Enabled Delay (t_WU)
Receiver or Transmitter Edge to
Transmitters Disabled Delay
(t_AUTOPWDN)
TIMING CHARACTERISTICS
(Note 3)
(Note 3)
25
-
1
25
-
30
25
-
100
Full
15
30
Maximum Data Rate
Receiver Propagation Delay
Receiver Output Enable Time
R_L = 3kΩ, One Transmitter C_L = 1000pF
Full
250
-
Switching
V_CC = 3V to 4.5V, C_L = 250pF Full 1000
-
V_CC = 4.5V to 5.5V,
C_L = 1000pF
Full 1000
-
Receiver Input to Receiver t_PHL
Output, C_L = 150pF
t_PLH
25
-
0.15
25
-
0.15
Normal Operation (ICL3245E Only)
25
-
200
Receiver Output Disable Time
Normal Operation (ICL3245E Only)
25
-
200
Transmitter Skew
t_PHL - t_PLH (Note 4)
25
-
25
Receiver Skew
t_PHL - t_PLH (Note 4)
25
-
50
Transition Region Slew Rate
V_CC = 3.3V, R_L = 3kΩ to 7kΩ, Measured From 3V to -3V or 25
24
-
-3V to 3V, C_L = 150pF to 1000pF
ESD PERFORMANCE
RS-232 Pins (T_OUT, R_IN)
Human Body Model
IEC61000-4-2 Contact Discharge
25
-
±15
25
-
±8
IEC61000-4-2 Air Gap Discharge
25
-
±15
All Other Pins
Human Body Model
25
-
±3
NOTES:
3. An “edge” is defined as a transition through the transmitter or receiver input thresholds.
4. Skews are measured at the receiver input switching points (1.4V).
MAX
-
±60
±25
UNITS
Ω
mA
µA
-
V
2.7
V
0.3
V
0.4
V
-
V
-
µs
-
µs
-
µs
60
sec
-
kbps
-
kbps
-
kbps
-
µs
-
µs
-
ns
-
ns
-
ns
-
ns
150 V/µs
-
kV
-
kV
-
kV
-
kV
7
FN4900.9
February 27, 2006