ISL6334D_09 Datasheet, PDF (6/28 Pages) Intersil Corporation – VR11.1, 4-Phase PWM Controller with Phase Dropping, Droop Disabled and Load Current Monitoring Features

ISL6334D
Absolute Maximum Ratings
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+6V
All Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . GND -0.3V to V_CC + 0.3V
Operating Conditions
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5V ±5%
Ambient Temperature
ISL6334DCRZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
ISL6334DIRZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
Thermal Information
Thermal Resistance (Notes 1, 2)
θ_JA (°C/W) θ_JC (°C/W)
40 Ld 6x6 QFN Package . . . . . . . . . . .
32
2
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
1. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379
2. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications
Operating Conditions: VCC = 5V, Unless Otherwise Specified. Parameters with MIN and/or MAX limits are 100%
tested at +25°C, unless otherwise specified. Temperature limits established by characterization and are not
production tested.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNITS
VCC SUPPLY CURRENT
Nominal Supply
VCC = 5VDC; EN_PWR = 5VDC; R_T = 100kΩ,
ISEN1 = ISEN2 = ISEN3 = ISEN4 = 80µA
-
16
20
mA
Shutdown Supply
POWER-ON RESET AND ENABLE
VCC = 5VDC; EN_PWR = 0VDC; R_T = 100kΩ
-
14
17
mA
VCC Rising POR Threshold
4.3
4.4
4.5
V
VCC Falling POR Threshold
3.75 3.88 4.0
V
EN_PWR Rising Threshold
0.875 0.897 0.920
V
EN_PWR Falling Threshold
0.735 0.752 0.770
V
EN_VTT Rising Threshold
0.875 0.897 0.920
V
EN_VTT Falling Threshold
0.735 0.752 0.770
V
REFERENCE VOLTAGE AND DAC
System Accuracy of ISL6334DCRZ
(VID = 1V to 1.6V, T_J = 0°C to +70°C)
System Accuracy of ISL6334DCRZ
(VID = 0.5V to 1V, T_J = 0°C to +70°C)
System Accuracy of ISL6334DIRZ
(VID = 1V to 1.6V, T_J = -40°C to +85°C)
System Accuracy of ISL6334DIRZ
(VID = 0.8V to 1V, T_J = -40°C to +85°C)
System Accuracy of ISL6334DIRZ
(VID = 0.5V to 0.8V, T_J = -40°C to +85°C)
VID Pull-up
VID Input Low Level
(Note 3, Closed-Loop)
(Note 3, Closed-Loop)
(Note 3, Closed-Loop)
(Note 3, Closed-Loop)
(Note 3, Closed-Loop)
After t_D3
-0.5
-
-5
-
-0.6
-
-6
-
-7
-
30
40
-
-
0.5 %VID
5
mV
0.6 %VID
6
mV
7
mV
50
µA
0.4
V
VID Input High Level
0.8
-
-
V
Max DAC Source Current
3.5
-
-
mA
Max DAC Sink Current
100
-
-
µA
Max REF Source/Sink Current
(Note 4)
50
-
-
µA
6
FN6802.1
May 28, 2009