HCS154MS Datasheet, PDF (6/9 Pages) Intersil Corporation – Radiation Hardened 4-to-16 Line Decoder/Demultiplexer

Specifications HCS154MS
TABLE 7. TOTAL DOSE IRRADIATION
CONFORMANCE
GROUPS
METHOD
TEST
PRE RAD
POST RAD
Group E Subgroup 2
5005
1, 7, 9
Table 4
NOTE:
1. Except FN test which will be performed 100% Go/No-Go.
READ AND RECORD
PRE RAD
POST RAD
1, 9
Table 4 (Note 1)
TABLE 8. STATIC AND DYNAMIC BURN-IN TEST CONNECTIONS
OSCILLATOR
OPEN
GROUND
1/2 VCC = 3V ± 0.5V VCC = 6V ± 0.5V
50kHz
25kHz
STATIC BURN-IN I TEST CONDITIONS (Note 1)
1 - 11, 13 - 17
12, 18 - 23
-
24
-
-
STATIC BURN-IN II TEST CONNECTIONS (Note 1)
1 - 11, 13 - 17
12
-
18 - 24
-
-
DYNAMIC BURN-IN I TEST CONNECTIONS (Note 2)
-
12, 18 - 21
1 - 11, 13 - 17
24
23
22
NOTES:
1. Each pin except VCC and GND will have a resistor of 10KΩ ± 5% for static burn-in.
2. Each pin except VCC and GND will have a resistor of 1KΩ ± 5% for dynamic burn-in.
TABLE 9. IRRADIATION TEST CONNECTIONS
OPEN
GROUND
VCC = 5V ± 0.5V
1 - 11, 13 - 17
12
18 - 24
NOTE: Each pin except VCC and GND will have a resistor of 47KΩ ± 5% for irradiation testing.
Group E, Subgroup 2, sample size is 4 dice/wafer 0 failures.
Spec Number 518754
6