ISL6614A_06 Datasheet, PDF (5/12 Pages) Intersil Corporation – Dual Advanced Synchronous Rectified Buck MOSFET Drivers with Pre-POR OVP

ISL6614A
Absolute Maximum Ratings
Supply Voltage (VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15V
Supply Voltage (PVCC) . . . . . . . . . . . . . . . . . . . . . . . . . VCC + 0.3V
BOOT Voltage (V_BOOT-GND). . . . . . . . . . . . . . . . . . . . . . . . . . . .36V
Input Voltage (V_PWM) . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to 7V
UGATE. . . . . . . . . . . . . . . . . . . V_PHASE - 0.3V_DC to V_BOOT + 0.3V
V_PHASE - 3.5V (<100ns Pulse Width, 2µJ) to V_BOOT + 0.3V
LGATE . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V_DC to V_PVCC + 0.3V
GND - 5V (<100ns Pulse Width, 2µJ) to V_PVCC + 0.3V
PHASE. . . . . . . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V_DC to 15V_DC
GND - 8V (<400ns, 20µJ) to 30V (<200ns, V_BOOT-GND<36V)
ESD Rating
Human Body Model . . . . . . . . . . . . . . . . . . . . Class I JEDEC STD
Thermal Information
Thermal Resistance (Typ. Notes 1, 2, 3) θ_JA (°C/W) θ_JC (°C/W)
SOIC Package (Note 1) . . . . . . . . . . . .
90
N/A
QFN Package (Notes 2, 3). . . . . . . . . .
46
9
Maximum Junction Temperature (Plastic Package) . . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . . -65°C to 150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300°C
(SOIC - Lead Tips Only)
Recommended Operating Conditions
Ambient Temperature Range . . . . . . . . . . . . . . . . . . . .-40°C to 85°C
Maximum Operating Junction Temperature . . . . . . . . . . . . . . 125°C
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V ±10%
Supply Voltage Range, PVCC . . . . . . . . . . . . . . . . 5V to 12V ±10%
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air.
2. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
3. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Recommended Operating Conditions, Unless Otherwise Noted.
PARAMETER
SYMBOL
TEST CONDITIONS
VCC SUPPLY CURRENT
Bias Supply Current
Gate Drive Bias Current
POWER-ON RESET AND ENABLE
I_VCC
I_PVCC
f_PWM = 300kHz, V_PVCC = 12V
f_PWM = 300kHz, V_PVCC = 12V
VCC Rising Threshold
0°C to 85°C
-40°C to 85°C
VCC Falling Threshold
0°C to 85°C
-40°C to 85°C
PWM INPUT (See Timing Diagram on Page 8)
Input Current
PWM Rising Threshold
I_PWM
V_PWM = 5V
V_PWM = 0V
VCC = 12V
PWM Falling Threshold
VCC = 12V
Typical Three-State Shutdown Window
VCC = 12V
Three-State Lower Gate Falling Threshold
VCC = 12V
Three-State Lower Gate Rising Threshold
VCC = 12V
Three-State Upper Gate Rising Threshold
VCC = 12V
Three-State Upper Gate Falling Threshold
VCC = 12V
Shutdown Holdoff Time
t_TSSHD
MIN TYP MAX UNITS
-
7.1
-
mA
-
9.7
-
mA
9.35 9.80 10.05
V
8.35
-
10.05
V
7.35 7.60 8.00
V
6.35
-
8.00
V
-
500
-
µA
-
-460
-
µA
-
3.00
-
V
-
2.00
-
V
1.80
-
2.40
V
-
1.50
-
V
-
1.00
-
V
-
3.20
-
V
-
2.60
-
V
-
245
-
ns
5
FN9160.3
January 3, 2006