ISL60002 Datasheet, PDF (5/37 Pages) Intersil Corporation – Precision, Low Noise FGA Voltage References

ISL60002
Absolute Maximum Ratings
Max Voltage V_IN to GND . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6.5V
Max Voltage V_OUT to GND (10s): . . . . . . . . . . -0.5V to +V_OUT + 1V
Voltage on “DNC” pins . . . . . No connections permitted to these pins
ESD Ratings
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5500V
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .550V
Charged Device Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2kV
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JA (°C/W)
3 Ld SOT-23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202.70
Continuous Power Dissipation (T_A = +85°C) . . . . . . . . . . . . . .99mW
Maximum Junction Temperature (Plastic Package) . . . . . . . +107°C
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-free Reflow Profile (Note 2) . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Temperature Range
Industrial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
3.3V Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +105°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
1. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
2. Post-reflow drift for the ISL60002 devices will range from 100μV to 1.0mV based on experimental results with devices on FR4 double sided
boards. The design engineer must take this into account when considering the reference voltage after assembly.
Electrical Specifications ISL60002-10, V_OUT = 1.024V (Additional specifications on page 8, “Common Electrical Specifications”)
Operating Conditions: V_IN = 3.0V, I_OUT = 0mA, C_OUT = 0.001µF,
T_A = -40 to +85°C, unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
V_OUT
V_OA
Output Voltage
V_OUT Accuracy (Note 3)
T_A = +25°C
ISL60002B10
1.024
V
-1.0
+1.0
mV
ISL60002C10
-2.5
+2.5
mV
ISL60002D10
-5.0
+5.0
mV
V_IN
Input Voltage Range
2.7
5.5
V
Electrical Specifications ISL60002-11, V_OUT = 1.200V (Additional specifications on page 8, “Common Electrical Specifications”)
Operating Conditions: V_IN = 3.0V, I_OUT = 0mA, C_OUT = 0.001µF, T_A = -40 to
+85°C, unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
V_OUT
V_OA
Output Voltage
V_OUT Accuracy (Note 3)
T_A = +25°C
ISL60002B11
1.200
V
-1.0
+1.0
mV
ISL60002C11
-2.5
+2.5
mV
ISL60002D11
-5.0
+5.0
mV
V_IN
Input Voltage Range
2.7
5.5
V
Electrical Specifications ISL60002-12, V_OUT = 1.250V (Additional specifications on page 8, “Common Electrical Specifications”)
Operating Conditions: V_IN = 3.0V, I_OUT = 0mA, C_OUT = 0.001µF,
T_A = -40 to +85°C, unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
MIN
TYP MAX
UNITS
V_OUT
V_OA
Output Voltage
V_OUT Accuracy (Note 3)
T_A = +25°C
ISL60002B12
1.250
V
-1.0
+1.0
mV
ISL60002C12
-2.5
+2.5
mV
ISL60002D12
-5.0
+5.0
mV
V_IN
Input Voltage Range
2.7
5.5
V
5
FN8082.16
May 4, 2009