English
Language : 

ISL54212 Datasheet, PDF (5/15 Pages) Intersil Corporation – MP3/USB 2.0 High Speed Switch with Negative Signal Handling
ISL54212
Electrical Specifications - 2.7V to 3.6V Supply Test Conditions: VDD = +3.3V, GND = 0V, VINH = 1.4V, VINL = 0.5V, VCTRLH = 1.4V,
VCTRLL = 0.5V, (Note 4), unless otherwise specified. (Continued)
PARAMETER
TEST CONDITIONS
TEMP MIN
MAX
(°C) (Notes 5, 8) TYP (Notes 5, 8) UNITS
DIGITAL INPUT CHARACTERISTICS
Voltage Low, VINL , VCTRLL
Voltage High, VINH, VCTRLH
Input Current, IINL, IINH
VDD = 2.7V to 3.6V
VDD = 2.7V to 3.6V
VDD = 3.6V, IN = 0V or 3.6V, CTRL = 0V
Full
-
-
0.5
V
Full
1.4
-
-
V
25
-10
2.5
10
nA
Full
-50
-
50
nA
Input Current, ICTRLL
VDD = 3.6V, IN = 0V, CTRL = 0V
25
-15
10
Full
-50
-
15
nA
50
nA
Input Current, ICTRLH
VDD = 3.6V, IN = 0V, CTRL = 3.6V
25
-1.1
1.0
1.1
μA
Full
-2
-
2
μA
CTRL Pull-Down Resistor, RCTRL VDD = 3.6V, IN = 0V, CTRL = 3.6V
NOTES:
25
-
4
-
MΩ
4. VLOGIC = Input voltage to perform proper function.
5. The algebraic convention, whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.
6. Flatness is defined as the difference between maximum and minimum value of on-resistance over the specified analog signal range.
7. RON matching between channels is calculated by subtracting the channel with the highest max RON value from the channel with lowest max
RON value, between L and R or between D+ and D-.
8. Parts are 100% tested at +25°C. Over temperature limits established by characterization and are not production tested.
Test Circuits and Waveforms
LOGIC
INPUT
VDD
0V
50%
tOFF
tr <20ns
tf <20ns
SWITCH
INPUT
VINPUT
SWITCH
OUTPUT 0V
VOUT
90%
tON
90%
Logic input waveform is inverted for switches that have the opposite
logic sense.
VDD
C
VINPUT
SWITCH
INPUT
CTRL
AUDIO or USB
IN
COMx
VIN
GND
VOUT
RL
CL
50Ω 10pF
Repeat test for all switches. CL includes fixture and stray
capacitance.
VOUT
=
V (INPUT)
------------R-----L-------------
RL + R(ON)
FIGURE 1A. MEASUREMENT POINTS
FIGURE 1. SWITCHING TIMES
FIGURE 1B. TEST CIRCUIT
5
FN6556.0
September 18, 2007