ISL32483E Datasheet, PDF (5/17 Pages) Intersil Corporation – Fault Protected, Extended CMR, RS-485/RS-422 Transceivers

ISL32483E, ISL32485E
Absolute Maximum Ratings
V_CC to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7V
Input Voltages
DI, INV, RINV, DINV, DE, RE. . . . . . . . . . . . . . . . . . . . -0.3V to (V_CC + 0.3V)
Input/Output Voltages
A/Y, B/Z, A, B, Y, Z. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±60V
A/Y, B/Z, A, B, Y, Z
(Transient Pulse Through 100Ω, see Note 15). . . . . . . . . . . . . . . . . ±80V
RO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to (V_CC +0.3V)
Short Circuit Duration
Y, Z. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
ESD Rating . . . . . . . . . . . . . . . . . . . . see “ESD PERFORMANCE” on page 6
Latch-up (Tested per JESD78, Level 2, Class A). . . . . . . . . . . . . . . . +125°C
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
8 Ld SOIC Package (Notes 4, 5). . . . . . . . . . 116
47
14 Ld SOIC Package (Notes 4, 5) . . . . . . . . 88
39
Maximum Junction Temperature (Plastic Package) . . . . . . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . . . . . . -65°C to +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Supply Voltage (V_CC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V
Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Bus Pin Common Mode Voltage Range . . . . . . . . . . . . . . . . . -25V to +25V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
5. For θ_JC, the “case temp” location is taken at the package top center.
Electrical Specifications Test Conditions: V_CC = 4.5V to 5.5V; Unless Otherwise Specified. Typicals are at V_CC = 5V, T_A = +25°C (Note 6).
Boldface limits apply over the operating temperature range, -40°C to +85°C.
PARAMETER
SYMBOL
TEST CONDITIONS
TEMP
MIN
MAX
(°C) (Note 14) TYP (Note 14) UNITS
DC CHARACTERISTICS
Driver Differential V_OUT
(No load)
V_OD1
Full
-
-
V_CC
V
Driver Differential V_OUT
(Loaded, Figure 3A)
V_OD2
R_L = 100Ω (RS-422)
R_L = 54Ω (RS-485)
Full
2.4
3.2
-
V
Full
1.5
2.5
V_CC
V
R_L = 54Ω (PROFIBUS, V_CC ≥ 5V)
Full
2.0
2.5
-
V
R_L = 21Ω (Six 120Ω terminations for Star
Full
0.8
1.3
-
V
Configurations, V_CC ≥ 4.75V)
Change in Magnitude of Driver
Differential V_OUT for
Complementary Output
States
ΔV_OD
R_L = 54Ω or 100Ω (Figure 3A)
Full
-
-
0.2
V
Driver Differential V_OUT with
V_OD3 R_L = 60Ω, -7V ≤ V_CM ≤ 12V
Full
1.5
2.1
V_CC
V
Common Mode Load
(Figure 3B)
R_L = 60Ω, -25V ≤ V_CM ≤ 25V (V_CC ≥ 4.75V)
Full
1.7
2.3
V
R_L = 21Ω, -15V ≤ V_CM ≤ 15V (V_CC ≥ 4.75V)
Full
0.8
1.1
-
V
Driver Common-Mode V_OUT
V_OC
R_L = 54Ω or 100Ω
Full
-1
-
3
V
(Figure 3)
R_L = 60Ω or 100Ω, -20V ≤ V_CM ≤ 20V
Full
-2.5
-
5
V
Change in Magnitude of Driver
Common-Mode V_OUT for
Complementary Output
States
DV_OC
R_L = 54Ω or 100Ω (Figure 3A)
Full
-
-
0.2
V
Driver Short-Circuit Current
Logic Input High Voltage
Logic Input Low Voltage
Logic Input Current
I_OSD
I_OSD1
I_OSD2
V_IH
V_IL
I_IN1
DE = V_CC, -25V ≤ V_O ≤ 25V (Note 8)
At First Fold-back, 22V ≤ V_O ≤ -22V
At Second Fold-back, 35V ≤ V_O ≤ -35V
DE, DI, RE, INV, RINV, DINV
DE, DI, RE, INV, RINV, DINV
DI
DE, RE, INV, RINV, DINV
Full
-250
-
250
mA
Full
-83
83
mA
Full
-13
13
mA
Full
2.5
-
-
V
Full
-
-
0.8
V
Full
-1
-
1
µA
Full
-15
6
15
µA
5
FN7785.0
January 18, 2011