English
Language : 

ISL32470E Datasheet, PDF (5/19 Pages) Intersil Corporation – Fault Protected, Extended Common Mode Range, RS-485/RS-422 Transceivers
ISL32470E, ISL32472E, ISL32475E, ISL32478E
Absolute Maximum Ratings
VCC to Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7V
Input Voltages
DI, DE, RE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to (VCC + 0.3V)
Input/Output Voltages
A/Y, B/Z, A, B, Y, Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±60V
A/Y, B/Z, A, B, Y, Z
(Transient Pulse Through 100Ω, Note 15). . . . . . . . . . . . . . . . . . . ±80V
RO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to (VCC +0.3V)
Short Circuit Duration
Y, Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
ESD Rating . . . . . . . . . . . . . . . . . . . . see “ESD PERFORMANCE” on page 6
Latch-up (per JESD78, Level 2, Class A) . . . . . . . . . . . . . . . . . . . . . +125°C
Thermal Information
Thermal Resistance (Typical)
θJA (°C/W) θJC (°C/W)
8 Ld SOIC Package (Notes 4, 5) . . . . . . . . . . 116
47
14 Ld SOIC Package (Notes 4, 5) . . . . . . . . .
88
39
Maximum Junction Temperature (Plastic Package). . . . . . . . . . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . . . . . .-65°C to +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Supply Voltage (VCC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Bus Pin Common Mode Voltage Range. . . . . . . . . . . . . . . . . . -15V to +15V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
5. For θJC, the “case temp” location is taken at the package top center.
Electrical Specifications Test Conditions: VCC = 4.5V to 5.5V; Unless Otherwise Specified. Typicals are VCC = 5V, TA = +25°C
(Note 6). Boldface limits apply over the operating temperature range, -40°C to +85°C.
PARAMETER
SYMBOL
TEST CONDITIONS
TEMP
MIN
MAX
(°C) (Note 14) TYP (Note 14) UNITS
DC CHARACTERISTICS
Driver Differential VOUT (No load)
VOD1
Full
-
-
VCC
V
Driver Differential VOUT (Loaded,
Figure 3A)
VOD2
RL = 100Ω (RS-422)
RL = 54Ω (RS-485)
Full
2.4
3.2
-
V
Full
1.5
2.5
VCC
V
RL = 54Ω (PROFIBUS, VCC ≥ 5V)
Full
2.0
2.5
-
RL = 21Ω (Six 120Ω terminations for Star
Full
0.8
1.3
-
V
Configurations, VCC ≥ 4.75V)
Change in Magnitude of Driver
Differential VOUT for
Complementary Output States
ΔVOD RL = 54Ω or 100Ω (Figure 3A)
Full
-
-
0.2
V
Driver Differential VOUT with
VOD3 RL = 60Ω, -7V ≤ VCM ≤ 12V
Full
1.5
2.1
VCC
V
Common Mode Load (Figure 3B)
RL = 60Ω, -15V ≤ VCM ≤ 15V (VCC ≥ 4.75V) Full
1.7
2.3
-
V
Driver Common-Mode VOUT (Figure
3A)
VOC RL = 54Ω or 100Ω
Full
-1
-
3
V
Change in Magnitude of Driver
Common-Mode VOUT for
Complementary Output States
ΔVOC RL = 54Ω or 100Ω (Figure 3A)
Full
-
-
0.2
V
Driver Short-Circuit Current
Logic Input High Voltage
Logic Input Low Voltage
Logic Input Current
IOSD
IOSD1
IOSD2
VIH
VIL
IIN1
DE = VCC, -15V ≤ VO ≤ 15V (Note 8)
At First Foldback, 22V ≤ VO ≤ -22V
At Second Foldback, 35V ≤ VO ≤ -35V
DE, DI, RE
DE, DI, RE
DI
DE, RE
Full
-250
-
250
mA
Full
-83
-
83
mA
Full
-13
-
13
mA
Full
2.5
-
-
V
Full
-
-
0.8
V
Full
-1
-
1
µA
Full
-15
6
15
µA
5
FN7784.0
January 21, 2011