ISL28130_1012 Datasheet, PDF (5/19 Pages) Intersil Corporation – Single, Dual, and Quad Micropower, Low Drift, RRIO Operational Amplifiers

ISL28130, ISL28230, ISL28430
Absolute Maximum Ratings
Max Supply Voltage V+ to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6.5V
Max Voltage VIN to GND . . . . . . . . . . . . . . . . . . . . (V- - 0.3V) to (V+ + 0.3V)V
Max Input Differential Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5V
Max Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Max Voltage VOUT to GND (10s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±3.0V
ESD Tolerance (ISL28130)
Human Body Model (Tested at JESD22-A114F) . . . . . . . . . . . . . . . 3000V
Machine Model (Tested at JESD22-A115B) . . . . . . . . . . . . . . . . . . . 200V
Charged Device Model (Tested at JESD22-C110D) . . . . . . . . . . . . 1500V
ESD Tolerance (ISL28230, ISL28430)
Human Body Model (Tested at JESD22-A114F) . . . . . . . . . . . . . . . 4000V
Machine Model (Tested at JESD22-A115B) . . . . . . . . . . . . . . . . . . . 400V
Charged Device Model (Tested at JESD22-C110D) . . . . . . . . . . . . 2000V
Latch-Up Passed Per JESD78B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +125°C
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
5 Ld SOT-23 (Notes 5, 7) . . . . . . . . . . . . . . . . . 225
110
5 Ld SC70 (Notes 5, 7). . . . . . . . . . . . . . . . . . . 206
146
8 Ld SOIC (ISL28130) (Notes 5, 7) . . . . . . . . . 135
95
8 Ld MSOP (Notes 5, 7) . . . . . . . . . . . . . . . . . . 180
65
8 Ld SOIC (ISL28230) (Notes 5, 7) . . . . . . . . . 125
90
8 Ld DFN (Notes 6, 8). . . . . . . . . . . . . . . . . . . .
53
12
14 Ld TSSOP (Notes 5, 7) . . . . . . . . . . . . . . . . 110
40
14 Ld SOIC (Notes 5, 7) . . . . . . . . . . . . . . . . . .
75
47
Maximum Storage Temperature Range . . . . . . . . . . . . . .-65°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Temperature Range:
Full Grade Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +125°C
Commercial Grade Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
5. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
6. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
7. For θ_JC, the “case temp” location is taken at the package top center.
8. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications V₊ = 5V, V_- = 0V, VCM = 2.5V, T_A = +25°C, R_L = 10kΩ, unless otherwise specified. Boldface limits
apply over the operating temperature range, -40°C to +125°C.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
MAX
(Note 9) TYP (Note 9)
UNIT
DC SPECIFICATIONS
V_OS
Input Offset Voltage
Vs = 1.65V to 5.5V
-40
±5
40
µV
-46.8
-
46.8
µV
TCV_OS
Input Offset Voltage Temperature
Coefficient
-150
20
150
nV/°C
I_OS
TCI_OS
Input Offset Current
Input Offset Current Temperature
Coefficient
-
-60
-
-
0.11
-
pA
pA/°C
I_B
Input Bias Current
T = 0°C to +70°C
-250
-
250
pA
-700
-
700
pA
Common Mode Input
Voltage Range
Guaranteed by CMRR
-0.1
-
5.1
V
CMRR
Common Mode Rejection Ratio
VCM = -0.1V to 5.1V
110
125
-
dB
105
-
-
dB
PSRR
Power Supply Rejection Ratio
Vs = 2.0V to 5.5V
105
138
-
dB
105
-
-
dB
V_OH
Output Voltage Swing, High
4.950 4.981
-
V
V_OL
Output Voltage Swing, Low
-
18
50
mV
A_OL
Open Loop Gain
R_L = 1MΩ
-
150
-
dB
V₊
Supply Voltage
Guaranteed by V_OS
1.65
-
5.5
V
5
FN7623.1
December 16, 2010