DG406883 Datasheet, PDF (5/13 Pages) Intersil Corporation – Single 16-Channel/Differential 8-Channel CMOS Analog Multiplexers

DG406/883, DG407/883
TABLE 3. DC ELECTRICAL PERFORMANCE SPECIFICATIONS
Devices tested at +V_SUPPLY = +15V, -V_SUPPLY = -15V, V_AL = 0.8V, V_AH = 2.4V, Unless Otherwise Specified
PARAMETER
SYMBOL
CONDITIONS
NOTE TEMP (^oC) MIN
TYP
MAX UNITS
Off Isolation Time
V_ISO V_EN = 0V, R_L = 1K,
5
25
f = 100kHz, GEN = 1V_P-P
Sine Wave, See Figure 5
50
-
-
dB
Charge Transfer Error
V_CTE C_L = 10nF, V_S = 0V, R_S = 0Ω, 5
25
See Figure 4
-
-
10
mV
Crosstalk
V_CT R_L = 1K, f = 100kHz,
5
25
GEN = 1V_P-P Sine Wave, See
Figure 5
50
-
-
dB
Source OFF Capacitance C_S(OFF) V_EN = 0V, V_S = 0V, f = 1MHz 65
25
Drain OFF Capacitance C_D(OFF) V_EN = 0V, V_D = 0V, f = 1MHz
DG406
5
25
-
-
10
pF
-
-
200
pF
DG407
5
25
-
-
100
pF
Drain ON Capacitance
C_D(ON) V_EN = 0V, V_D = 0V, f = 1MHz
DG406
5
25
-
-
400
pF
DG407
5
25
-
-
200
pF
NOTE:
5. Parameters listed via process parameters and are not directly tested at final production. These parameters are lab characterized upon
design release, or upon design changes. These parameters are guaranteed by characterization based upon data from multiple produc-
tion rich reflect lot to lot and within lot variation.
TABLE 4. ELECTRICAL TEST REQUIREMENTS
MIL-STD-883 TEST REQUIREMENTS
SUBGROUPS (SEE TABLES 1 AND 2)
Interim Electrical Parameters (Pre Burn0In)
1
Final Electrical Test Parameters
1 (Note 6), 2, 3, 9, 10, 11
Group A Test Requirements
1, 2, 3, 9, 10, 11
Group C and D Endpoints
1
NOTE:
6. PDA applied to Subgroup 1 only.
Spec Number 512041-883
5