ISL78301 Datasheet, PDF (4/10 Pages) Intersil Corporation – 40V, Low Quiescent Current, 150mA Linear Regulator for Automotive Applications

ISL78301
Absolute Maximum Ratings
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +45V
IN pin to GND Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to VCC
OUT pin to GND Voltage . . . . . . . . . . . . . . . . . . . . . . . . .. . .GND - 0.3V to 16V
ADJ pin to GND Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GND - 0.3V to 3V
EN pin to GND Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to VCC
Output Short-circuit Duration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
ESD Rating
Human Body Model (Tested per JESD22-A114E) . . . . . . . . . . . . . . . . 5kV
Machine Model (Tested per JESD-A115-A) . . . . . . . . . . . . . . . . . . . 200V
Charge Device Model (Tested per JESD22-C101C). . . . . . . . . . . . . 2.2kV
Latch Up (Tested per JESD78B; Class II, Level A) . . . . . . . . . . . . . . . 100mA
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
14 Ld HTSSOP Package (Notes 4, 5) . . . . . .
37
5
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . . . . . .-65°C to +175°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Ambient Temperature Range . . . . . . . . . . . . . . . . . . . . . . -40°C to +125°C
IN pin to GND Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+3V to +40V
OUT pin to GND Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+2.5V to +12V
EN pin to GND Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0V to +40V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
5. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Recommended Operating Conditions, unless otherwise noted. V_IN = 14V, I_OUT = 1mA, C_IN = 0.1μF,
C_OUT = 10μF, T_A = T_J = -40°C to +125°C, unless otherwise noted. Typical specifications are at T_A = +25°C. Boldface limits apply over the operating
temperature range, -40°C to +125°C.
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
(Note 8) TYP (Note 8) UNIT
Input Voltage Range
V_IN
Cold Crank condition
6
40
V
3
40
V
Guaranteed Output
Current
I_OUT
V_IN = V_OUT + VDO
150
mA
Output Voltage
V_OUT
EN = High
V_IN = 14V
I_OUT = 0.1mA to 150mA
3.3V Version
5V Version
ADJ pin voltage
3.267 3.3 3.333 V
4.950 5 5.050 V
1.211 1.223 1.235 V
Line Regulation
Load Regulation
Dropout Voltage
(Note 6)
Shutdown Current
Quiescent Current
ΔV_OUT/ΔV_IN 3V ≤ V_IN ≤ 40V
I_OUT = 1mA
ΔV_OUT/ΔI_OUT V_IN = V_OUT +V_DO
I_OUT = 100µA to 150mA
ΔV_DO
I_OUT = 1mA, V_OUT = 3.3V
I_OUT = 150mA, V_OUT = 3.3V
I_OUT = 1mA, V_OUT = 5V
I_OUT = 150mA, V_OUT = 5V
I_SHDN
EN = LOW
I_Q
EN = High
V_IN = 14V
I_OUT = 0mA, ADJ Version, V_OUT = V_ADJ
I_OUT = 1mA, ADJ Version, V_OUT = V_ADJ
I_OUT = 10mA, ADJ Version, V_OUT = V_ADJ
I_OUT =150mA, ADJ Version, V_OUT = V_ADJ
I_OUT = 0, 3.3V and 5.0V Versions
I_OUT = 1mA, 3.3V and 5.0V Versions
I_OUT = 10mA, 3.3V and 5.0V Versions
I_OUT = 150mA, 3.3V and 5.0V Versions
0.04 0.15 %
0.3 0.6 %
7
33 mV
380 525 mV
7
33 mV
295 460 mV
2 3.64 µA
18
24 µA
22
42 µA
34
60 µA
90 125 µA
22
28 µA
27
45 µA
39
65 µA
96 142 µA
4
FN6705.0
October 21, 2011