ISL55002 Datasheet, PDF (4/14 Pages) Intersil Corporation – High Supply Voltage 220MHz Unity-Gain Stable Operational Amplifiers

ISL55002, ISL55004
AC Electrical Specifications V_S = ±15V, A_V = +1, R_L = 1kΩ unless otherwise specified. (Continued)
PARAMETER
DESCRIPTION
CONDITION
MIN
TYP MAX UNIT
SR
Slew Rate (Note 1)
260
300
V/µs
FPBW
t_S
dG
Full-power Bandwidth (Note 2)
Settling to +0.1% (A_V = +1)
Differential Gain (Note 3)
V_S = ±15V
V_S = ±15V, 10V step
NTSC/PAL
9.5
MHz
75
ns
0.01
%
dP
Differential Phase
NTSC/PAL
0.05
°
eN
Input Noise Voltage
10kHz
12
nV/√Hz
iN
Input Noise Current
10kHz
1.5
pA/√Hz
NOTES:
1. Slew rate is measured on rising edge.
2. For V_S = ±15V, V_OUT = 10V_PP, for V_S = ±5V, V_OUT = 5V_PP. Full-power bandwidth is based on slew rate measurement using FPBW = SR / (2π
* V_PEAK).
3. Video performance measured at V_S = ±15V, A_V = +2 with two times normal video level across R_L = 150Ω. This corresponds to standard video
levels across a back-terminated 75Ω load. For other values or R_L, see curves.
Typical Performance Curves
FIGURE 1. OPEN-LOOP GAIN vs FREQUENCY
FIGURE 2. OPEN-LOOP PHASE vs FREQUENCY
FIGURE 3. GAIN vs FREQUENCY FOR VARIOUS NON-
INVERTING GAIN SETTINGS
4
FIGURE 4. GAIN vs FREQUENCY FOR VARIOUS INVERTING
GAIN SETTINGS
FN7497.1
July 15, 2005