English
Language : 

ISL54103IHZ-T7A Datasheet, PDF (4/8 Pages) Intersil Corporation – More Reliable HDCP Performance In Video Multiplexers and Cable Extenders
ISL54103
Absolute Maximum Ratings
Supply Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . -1V to 6.5V
Operating Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +135°C
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
Voltage on Pins . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to VDD+0.3V
ESD Min Other Pins (HBM) . . . . . . . . . . . . . . . . . . . . . . . . . . . .>2kV
ESD DDC1 and DDC2 Pins (HBM) . . . . . . . . . . . . . . . . . . . . . .>8kV
Thermal Information
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7V to 5.5V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
Electrical Specifications Over all operating conditions unless otherwise specified, Typical values are measured at VDD = 3.3V and
TA = +25°C
SYMBOL
PARAMETER
CONDITIONS
MIN
(Note 6)
TYP
MAX
(Note 6)
UNIT
ANALOG PARAMETERS
VDD
Supply Voltage Range
VDD RAMP VDD Ramp Rate
IDD
Supply Current
DDC1 = DDC2 = Open
IOUT_SB Standby Pull-Up Current
DDC1 = DDC2 = VDD - 1.0V
IOUT_A1 Active Pull-Up Current
DDC1 = GND; DDC2 = Open
IOUT_A2
DDC1 = Open; DDC2 = GND
IOUT_B1 Boost Pull-Up Current (Figure 2) VTRIPL < DDC1 < VTRIPH, DDC2 = Open
IOUT_B2
VTRIPL < DDC2 < VTRIPH, DDC1 = Open
VTRIPL
Input Voltage Threshold Low
VTRIPH Input Voltage Threshold High
fMAX
DDC Max Frequency
NSS
Noise Spike Suppression
(Note 5) (Figure 10)
2.7
0.05
125
125
1.6
1.6
0.65
VDD - 0.60
80
80
275
275
2.2
2.2
0.75
VDD - 0.50
20
5.5
50
100
125
350
350
0.85
VDD - 0.40
100
V
V/ms
µA
µA
µA
µA
mA
mA
V
V
kHz
V-ns
NOTES:
5. Measured as area under triangular waveform above VTRIPL, with time as base and VIN as height (See Figure 10).
6. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design.
4
FN6303.2
October 14, 2011