ISL28118 Datasheet, PDF (4/23 Pages) Intersil Corporation – 40V Precision Single Supply Rail-to-Rail Output Low Power Operational Amplifiers

ISL28118, ISL28218
Absolute Maximum Ratings
Maximum Supply Voltage . . . . . . . . . . . . . . . . . . . . . . 42V
Maximum Differential Input Current . . . . . . . . . . . . . 20mA
Maximum Differential Input
Voltage. . . . . . . . . . . . . . . . 42V or V_- - 0.5V to V₊ + 0.5V
Min/Max Input Voltage . . . . . . 42V or V_- - 0.5V to V₊ + 0.5V
Max/Min Input Current for Input Voltage . . >V+ or <V- ±20mA
Output Short-Circuit Duration (1 output at a time) . . Indefinite
ESD Tolerance
Human Body Model (Tested per JESD22-A114F) . . . . . 3kV
Machine Model (Tested per JESD22-A115-A) . . . . . . . 300V
Charged Device Model (Tested per CDM-22CI0ID) . . . . 2kV
Operating Conditions
Ambient Operating Temperature Range . . . . -40°C to +125°C
Maximum Operating Junction Temperature . . . . . . . +150°C
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
ISL28118
8 Ld TDFN Package (Notes 5, 6) . . .
50
9
8 Ld SOIC Package (Notes 4, 7) . . . 120
60
8 Ld MSOP Package (Notes 4, 7) . . 165
57
ISL28218
8 Ld TDFN Package (Notes 5, 6) . . .
48
5.5
8 Ld SOIC Package (Notes 4, 7) . . . 120
55
8 Ld MSOP Package (Notes 4, 7) . . 150
45
Storage Temperature Range . . . . . . . . . . . -65°C to +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact
product reliability and result in failures not covered by warranty.
NOTES:
4. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief
TB379 for details.
5. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach”
features. See Tech Brief TB379.
6. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
7. For θ_JC, the “case temp” location is taken at the package top center.
Electrical Specifications
V_S ±15V, V_CM = 0, V_O = 0V, R_L = Open, T_A= +25°C, unless otherwise noted. Boldface
limits apply over the operating temperature range, -40°C to +125°C. Temperature
data established by characterization.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
(Note 8)
MAX
TYP (Note 8) UNIT
V_OS
Input Offset Voltage
ISL28118
-150
25
150
µV
-270
270
µV
ISL28218
-230
40
230
µV
-290
290
µV
TCV_OS
Input Offset Voltage
Temperature Coefficient
ISL28118
ISL28218
-1.2
0.2
1.2
µV/°C
-1.4
0.3
1.4
µV/°C
ΔV_OS
Input Offset Voltage Match
(ISL28218 only)
-280
44
280
µV
-365
365
µV
I_B
Input Bias Current
-575
-230
nA
-800
nA
TCI_B
Input Bias Current
Temperature Coefficient
-0.8
nA/°C
I_OS
Input Offset Current
-50
4
50
nA
-75
75
nA
CMRR
Common-Mode Rejection
Ratio
V_CM = V_- - 0.5V to V₊ - 1.8V
V_CM = V_- - 0.2V to V₊ -1.8V
118
dB
118
dB
ISL28118
V_CM = V_- to V₊ -1.8V
102
118
dB
98
dB
ISL28218
V_CM = V_- to V₊ -1.8V
103
118
dB
99
dB
4
FN7532.1
November 22, 2010