ISL22102_15 Datasheet, PDF (4/12 Pages) Intersil Corporation – 32 Tap, Push-button, Dual Audio Logarithmic Potentiometer with Buffer Amplifiers and Audio Detection

ISL22102
Absolute Maximum Ratings
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65C to +150C
Voltage on UP, DN, MUTE or SB
with Respect to GND . . . . . . . . . . . . . . . . . . . . .-0.3V to VCC + 0.3
Voltage on AVCC (referenced to GND) . . . . . . . . . . . . . -0.3V to +6V
Voltage on VCC (referenced to GND) . . . . . . . . . . . . . . -0.3V to +6V
Any Audio Inputs (referenced to VB) . . . . . . . . . . . . . ±AVCC/2 ± 0.3
Any Outputs (referenced to GND) . . . . . . . . . . .-0.3V to AVCC + 0.3
I_OUT max (10s). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30mA
Latchup . . . . . . . . . . . . . . . . . . . . . . . . . . Class II, Level A at +85°C
ESD Rating
Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5kV
Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250V
Thermal Information
Thermal Resistance (Typical)
_JA (°C/W) _JC (°C/W)
20 Lead TSSOP (Note 1) . . . . . . . . . . .
85
N/A
20 Lead QFN (Notes 2, 3) . . . . . . . . . .
40
4
Maximum Junction Temperature (Plastic Package). . . . . . . . +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Temperature Range (Industrial) . . . . . . . . . . . . . . . . . . -40°C to 85°C
Supply Voltage (V_CC). . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7V to 5.5V
Analog Supply Voltage (AV_CC). . . . . . . . . . . . . . . . . . . . 2.7V to 5.5V
Power Rating of each DCP . . . . . . . . . . . . . . . . . . . . . . . . . . .15mW
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
1. _JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
2. _JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
3. For _JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Analog Specifications Over the recommended operating conditions unless otherwise specified.
SYMBOL
PARAMETER
TEST CONDITIONS
MIN
(Note 8)
DYNAMIC PERFORMANCE (Notes 5, 6)
Volume Control Range
-72
SNR
(Note 7)
Mute Mode
Signal Noise Ratios (Unweighted)
@1V_RMS
@1V_RMS @ 1kHz, AVCC = 5V
THD + N Total Harmonic Distortion + Noise
(Note 7)
@1V_RMS @ 1kHz, AVCC = 5V
Tap position from 0 to 10
XTalk DCP Isolation
(Note 7)
@1kHz, @ tap 10
PSRR Power Supply Rejection
(Note 7)
AVCC = 5V
(Note 7) -3db Cutoff Frequency
Tap position from 0 to 25
(Note 7) Noise
20Hz to 20kHz, VB Input
DCP ACCURACY
R_TOTAL End-to-end Resistance
End-to-end Resistance Tolerance
-20
DCP Input Resistance Matching
-2
Wiper Step Size
Tap position from 0 to 26
Tap position from 27 to 31
Wiper Step Size Error
Tap position from 0 to 26
Tap position from 27 to 29
Tap position from 30 to 31
DCP-to-DCP Matching
Tap position from 0 to 26
Tap position from 27 to 29
Tap position from 30 to 31
TC_V
(Note 7)
Power-up Attenuation (Default Wiper
Position at Tap 10)
Ratiometric Temperature Coefficient
Tap position 15
TYP
MAX
(Note 4) (Note 8) UNIT
-90
-90
0.01
-100
-90
100
3
18.5
-2
-4
±0.1
-20
±10
0
dB
dB
dB
%
dB
dB
kHz
µV_RMS
k
+20
%
+2
%
dB
dB
±0.5
dB
±1
dB
±2
dB
±0.5
dB
±1
dB
±2
dB
dB
ppm/°C
4
FN6788.2
September 21, 2015