ISL1550 Datasheet, PDF (4/13 Pages) Intersil Corporation – Single Port, VDSL2 Differential Line Driver

ISL1550
Absolute Maximum Ratings (T_A = +25°C)
V_S+ Voltage to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +13.2V
Driver V_IN+ Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GND to +V_S
C₀, C₁ Voltage to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +V_S
Current into any Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8mA
Continuous Output Current for Long Term Reliability. . . . . . . . . . . . . . . . .50mA
ESD Rating
Human Body Model (Tested per JESD22-A114F). . . . . . . . . . . . . . . . . . 4kV
Machine Model (Tested per JESD22-A115C) . . . . . . . . . . . . . . . . . . 300V
Charge Device Model (Tested per JESD22-C101E). . . . . . . . . . . . . .1.5kV
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
16 Ld QFN Package (Notes 4, 5) . . . . . . . .
53
16.5
Maximum Junction Temperature (Plastic Package) . . . . . . . . . . . .+150°C
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-40°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Ambient Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . .-40°C to +150°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
5. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications V_S = ±6V, see Figure 1, T_A = +25°C, unless otherwise specified.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
(Note 6) TYP
AC PERFORMANCE
BW
-3dB Bandwidth
See Figure 1
105
THD
Total Harmonic Distortion, Differential
SR
Slew Rate (20% to 80%)
DC PERFORMANCE
f = 200kHz, V_O = 12V_{P-P output}, R_L = 20Ω
f = 4MHz, V_O = 12V_{P-P output}, R_L = 100Ω
f = 10MHz, V_O = 12V_{P-P output}, R_L = 100Ω
V_OUT from -6V to +6V (differential)
1500
-89
-67
-61
2400
V_{OS_CM}
Input Offset Voltage Common Mode
-45
V_{OS_DM}
Input Offset Voltage Differential Mode
-7.5
INPUT CHARACTERISTICS
I_B+
I_B- _DM
Non-Inverting Input Bias Current
Inverting Input Bias Current Differential
Mode
-7.0
-3.0
-45
±7
e_O
Differential Output Noise
See Figure 1 [at transformer input]
45
OUTPUT CHARACTERISTICS
V_OUT
SUPPLY
Loaded Output Swing (single-ended)
V_S = ±6V, R_{L DIFF} = 100Ω
V_S = ±6V, R_{L DIFF} = 20Ω
±4.7
±5.0
±4.5
+V_S
Supply Voltage
Single supply (-V_S = GND)
8.0
12
I_S+ (Full Bias)
Positive Supply Current
All outputs at 0V, C₀ = C₁ = 0V
27
32
I_S+ (Medium Bias) Positive Supply Current
All outputs at 0V, C₀ = 5V, C₁ = 0V
19
23
I_S+ (Low Bias)
Positive Supply Current
All outputs at 0V, C₀ = 0V, C₁ = 5V
12
15
I_S+ (Power down) Positive Supply Current
All outputs at 0V, C₀ = C₁ = 5V
1.3
1.6
I_INH, C₀ or C₁
C₀, C₁ Input Current, High
C₀, C₁ = 6V
100
165
I_INL, C₀ or C₁
C₀, C₁ Input Current, Low
C₀, C₁ = 0V
-1.5
-1.0
V_INH, C₀ or C₁
C₀, C₁ Input Voltage, High
2.0
V_INL, C₀ or C₁
C₀, C₁ Input Voltage, Low
NOTE:
6. Compliance to datasheet limits is assured by one or more methods: production test, characterization and/or design.
MAX
(Note 6) UNIT
MHz
dBc
dBc
dBc
V/µs
+45
mV
+7.5
mV
+7.0
µA
+45
µA
nV√ Hz
V
V
13.2
V
37
mA
26
mA
18
mA
2.5
mA
224
µA
+1.5
µA
V
0.8
V
4
FN6795.0
March 16, 2012