HIP1011A_04 Datasheet, PDF (4/11 Pages) Intersil Corporation – PCI Hot Plug Controller

HIP1011A
Absolute Maximum Ratings
V_CC, 12VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +14.0V
12VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to V_12VIN +0.5V
12VO, 12VG, 3V5VG . . . . . . . . . . . . . . . . . . . . . -0.5V to V_CC +0.5V
M12VIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -15.0V to +0.5V
M12VO, M12VG . . . . . . . . . . . . . . . . . . . . . . V_M12VIN-0.5V to +0.5V
3VISEN, 5VISEN . . . . . . . . . . . -0.5V to the Lesser of V_CC or +7.0V
Voltage, Any Other Pin. . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +7.0V
12VO Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3A
M12VO Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.8A
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4KeV (HBM)
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JA (^oC/W)
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
105
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . .125^oC
Maximum Storage Temperature Range . . . . . . . . . . -65^oC to 150^oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . .300^oC
(SOIC - Lead Tips Only)
Die Characteristics
Number of Transistors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290
Operating Conditions
VCC Supply Voltage Range. . . . . . . . . . . . . . . . . . +10.8V to +13.2V
±12V, 5V and 3.3V Input Supply Tolerances . . . . . . . . . . . . . . . . ±10%
12VO Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0 to +0.5A
M12VO Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . .0 to +0.1A
Temperature Range (T_A) . . . . . . . . . . . . . . . . . . . . . . . . 0^oC to 70^oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. θ_JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief 379 for details.
2. All voltages are relative to GND, unless otherwise specified.
Electrical Specifications Nominal 5.0V and 3.3V Input Supply Voltages,
V_CC = 12VIN = 12V, M12VIN = -12V, T_A = T_J = 0 to 70^oC, Unless Otherwise Specified
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
5V / 3.3V SUPPLY CONTROL
5V Overcurrent Threshold
5V Overcurrent Threshold Voltage
5V Overcurrent Threshold Voltage
5V Undervoltage Trip Threshold
5V Undervoltage Fault Response Time
5V Turn-On Time
(PWRON High to 5VOUT = 4.75V)
5VS Input Bias Current
5VISEN Input Bias Current
3V Overcurrent Threshold
3V Overcurrent Threshold Voltage
3V Overcurrent Threshold Voltage
3V Undervoltage Trip Threshold
3V Undervoltage Fault Response Time
3V Turn-On Time
(PWRON High to 3VOUT = 3.00V)
3VS Input Bias Current
3VISEN Input Bias Current
3V5VG Vout Low
I_OC5V
See Typical Application Diagram
V_{OC5V_1} V_OCSET = 0.6V
V_{OC5V_2} V_OCSET = 1.2V
V_5VUV
t_5VUV
t_ON5V
C_3V5VG = 0.022µF, C_5VOUT = 2000µF,
R_L = 1Ω
IB_5VS
PWRON = High
IB_5VISEN PWRON = High
I_OC3V
See Typical Application Diagram
V_{OC3V_1} V_OCSET = 0.6V
V_{OC3V_2} V_OCSET = 1.2V
V_3VUV
t_3VUV
t_ON3V
C_3V5VG = 0.022µF, C_3VOUT = 2000µF,
R_L = 0.43Ω
IB_3VS
PWRON = High
IB_3VISEN PWRON = High
Vout_lo_35VG PWRON = Low, FLTN = Low
-
7.1
30
36
66
72
4.42
4.65
-
150
-
6.5
-40
-160
-
42
88
2.74
-
-
-26
-140
9.0
49
95
2.86
150
6.5
-40
-160
-
-26
-140
0.1
3V5VG Vout High
Vout_hi_35VG PWRON = High, FLTN = High
10.5
11.1
Gate Output Charge Current
IC_3V5VG PWRON = High, V_3V5VG = 2V
22.5
25.0
MAX UNITS
-
A
42
mV
79
mV
4.75
V
350
ns
-
ms
-20
µA
-110
µA
-
A
56
mV
102
mV
2.97
V
350
ns
-
ms
-20
µA
-110
µA
0.4
V
-
V
27.5
µA
4
FN4631.5
November 16, 2004