CD40147BMS Datasheet, PDF (4/8 Pages) Intersil Corporation – 10 Line to 4 Line BCD Priority Encoder

Specifications CD40147BMS
TABLE 3. ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)
LIMITS
PARAMETER
Propagation Delay
In Phase Output
Propagation Delay
Out of Phase Output
Transition Time
Input Capacitance
SYMBOL
CONDITIONS
TPHL
TPLH
VDD = 10V
VDD = 15V
TPHL
TPLH
VDD = 5V
VDD = 10V
VDD = 15V
TTLH VDD = 10V
VDD = 15V
CIN Any Input
NOTES
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
1, 2
TEMPERATURE MIN
+25^oC
-
+25^oC
-
+25^oC
-
+25^oC
-
+25^oC
-
+25^oC
-
+25^oC
-
+25^oC
-
MAX
400
300
850
350
250
100
80
7.5
UNITS
ns
ns
ns
ns
ns
ns
ns
pF
NOTES:
1. All voltages referenced to device GND.
2. The parameters listed on Table 3 are controlled via design or process and are not directly tested. These parameters are characterized
on initial design release and upon design changes which would affect these characteristics.
3. CL = 50pF, RL = 200K, Input TR, TF < 20ns.
TABLE 4. POST IRRADIATION ELECTRICAL PERFORMANCE CHARACTERISTICS
LIMITS
PARAMETER
Supply Current
N Threshold Voltage
N Threshold Voltage
Delta
P Threshold Voltage
P Threshold Voltage
Delta
Functional
Propagation Delay Time
SYMBOL
CONDITIONS
IDD VDD = 20V, VIN = VDD or GND
VNTH VDD = 10V, ISS = -10µA
∆VTN VDD = 10V, ISS = -10µA
VTP
∆VTP
VSS = 0V, IDD = 10µA
VSS = 0V, IDD = 10µA
F
TPHL
TPLH
VDD = 18V, VIN = VDD or GND
VDD = 3V, VIN = VDD or GND
VDD = 5V
NOTES: 1. All voltages referenced to device GND.
2. CL = 50pF, RL = 200K, Input TR, TF < 20ns.
NOTES
1, 4
1, 4
1, 4
TEMPERATURE MIN
+25^oC
-
+25^oC
-2.8
+25^oC
-
1, 4
+25^oC
0.2
1, 4
+25^oC
-
1
1, 2, 3, 4
+25^oC
+25^oC
VOH >
VDD/2
-
3. See Table 2 for +25^oC limit.
4. Read and Record
MAX
7.5
-0.2
±1
2.8
±1
VOL <
VDD/2
1.35 x
+25^oC
Limit
UNITS
µA
V
V
V
V
V
ns
TABLE 5. BURN-IN AND LIFE TEST DELTA PARAMETERS +25^oC
PARAMETER
SYMBOL
DELTA LIMIT
Supply Current - MSI-1
Output Current (Sink)
Output Current (Source)
IDD
IOL5
IOH5A
± 0.2µA
± 20% x Pre-Test Reading
± 20% x Pre-Test Reading
CONFORMANCE GROUP
Initial Test (Pre Burn-In)
Interim Test 1 (Post Burn-In)
Interim Test 2 (Post Burn-In)
TABLE 6. APPLICABLE SUBGROUPS
MIL-STD-883
METHOD
GROUP A SUBGROUPS
100% 5004
1, 7, 9
100% 5004
1, 7, 9
100% 5004
1, 7, 9
READ AND RECORD
IDD, IOL5, IOH5A
IDD, IOL5, IOH5A
IDD, IOL5, IOH5A
7-74