ISL70227SEH Datasheet, PDF (3/18 Pages) Intersil Corporation – 36V Rad Hard Dual Precision Operational Amplifier

ISL70227SEH
Absolute Maximum Ratings
Maximum Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42V
Maximum Supply Voltage (LET = 86.4 MeV•cm²/mg) . . . . . . . . . . . . . 36V
Maximum Differential Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Maximum Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.5V
Min/Max Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . V_- - 0.5V to V₊ + 0.5V
Max/Min Input Current for
Input Voltage >V+ or <V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20mA
Output Short-Circuit Duration
(1 output at a Time) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
ESD Tolerance
Human Body Model (Tested per MIL-PRF-883 3015.7). . . . . . . . . . . 2kV
Machine Model (Tested per JESD22-A115-A) . . . . . . . . . . . . . . . . . . 300V
Charged Device Model (Tested per CDM-22CI0ID) . . . . . . . . . . . . . . 750V
Di-electrically Isolated PR40 Process . . . . . . . . . . . . . . . . . . . Latch-up free
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
10 Ld Ceramic Flatpack (Notes 3, 4) . . . . . 130
20
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Ambient Operating Temperature Range . . . . . . . . . . . . . .-55°C to +125°C
Maximum Operating Junction Temperature . . . . . . . . . . . . . . . . . .+150°C
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . 4.5V (±2.25V) to 30V (±15V)
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
3. θ_JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
4. For θ_JC, the “case temp” location is the center of the ceramic on the package underside.
Electrical Specifications V_S ±15V, V_CM = 0, V_O = 0V, R_L = Open, T_A = +25°C, unless otherwise noted. Boldface limits apply over
the operating temperature range, -55°C to +125°C.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
MAX
(Note 5)
TYP
(Note 5)
UNIT
V_OS
Offset Voltage
-75
-10
75
µV
-100
100
µV
TCV_OS
I_OS
Offset Voltage Drift
Input Offset Current
-1
.1
1
µV/°C
-10
1
10
nA
-12
12
nA
I_B
Input Bias Current
-10
1
10
nA
-12
12
nA
V_CM
Input Voltage Range
Guaranteed by CMRR
-13
-12
13
V
12
V
CMRR
Common-Mode Rejection Ratio
PSRR
Power Supply Rejection Ratio
A_VOL
Open-Loop Gain
V_OH
Output Voltage High
V_CM = -13V to +13V
V_CM = -12V to +12V
V_S = ±2.25V to ±5V
V_S = ±3V to ±15V
V_O = -13V to +13V
R_L = 10kΩ to ground
R_L = 10kΩ to ground
115
115
110
110
1000
13.5
13.2
120
117
1500
13.65
dB
dB
dB
dB
V/mV
V
V
R_L = 2kΩ to ground
13.4
13.5
V
13.1
V
V_OL
Output Voltage Low
R_L = 10kΩ to ground
-13.65
-13.5
V
-13.2
V
R_L = 2kΩ to ground
-13.5
-13.4
V
-13.1
V
3
FN7958.1
August 24, 2012