ISL70218SEH Datasheet, PDF (3/20 Pages) Intersil Corporation – Rad Hard Dual 36V Precision Single-Supply, Rail-to-Rail Output, Low-Power Operational Amplifiers

ISL70218SEH
Absolute Maximum Ratings
Maximum Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42V
Maximum Supply Voltage (LET = 86.4 MeV•cm²/mg) . . . . . . . . . . . . . 36V
Maximum Differential Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Maximum Differential Input Voltage . . . . . . . . . . . . . . .V_- - 0.5V to V₊ + 0.5V
Min/Max Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . .V_- - 0.5V to V₊ + 0.5V
Max/Min Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20mA
Output Short-Circuit Duration (1 output at a time) . . . . . . . . . . . . . . Indefinite
ESD Tolerance
Human Body Model (Tested per MIL-PRF-883 3015.7). . . . . . . . . . . 2kV
Machine Model (Tested per JESD22-A115-A) . . . . . . . . . . . . . . . . . . 300V
Charged Device Model (Tested per CDM-22CI0ID) . . . . . . . . . . . . . . 750V
Di-electrically Isolated PR40 Process . . . . . . . . . . . . . . . . . . . Latch-up free
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
10 Ld Flatpack Package (Notes 3, 4). . . . . 130
20
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Ambient Operating Temperature Range . . . . . . . . . . . . . .-55°C to +125°C
Maximum Operating Junction Temperature . . . . . . . . . . . . . . . . . .+150°C
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . 3V (+1.8V/-1.2V) to 30V (±15V)
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
3. θ_JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
4. For θ_JC, the “case temp” location is the center of the package underside.
Electrical Specifications V_S ±15V, V_CM = 0, V_O = 0V, R_L = Open, T_A= +25°C, unless otherwise noted. Boldface limits apply over the
operating temperature range, -55°C to +125°C.
PARAMETER
V_OS
DESCRIPTION
Offset Voltage
CONDITIONS
MIN
MAX
(Note 5)
TYP
(Note 5)
40
230
290
UNIT
µV
µV
TCV_OS
ΔV_OS
I_OS
Offset Voltage Drift
Input Offset Voltage Match Channel to
Channel
Input Offset Current
0.3
1.4
µV/°C
44
280
µV
365
µV
-50
4
50
nA
-75
75
nA
I_B
Input Bias Current
-575
-230
nA
-800
nA
V_CMIR
Common Mode Input Voltage Range Guaranteed by CMRR Test
(V-) - 0.5
V-
(V+) - 1.8
V
(V+) - 1.8
V
CMRR
Common-Mode Rejection Ratio
V_CM = V_- to V₊ -1.8V
100
118
dB
V_CM = V_- to V₊ -1.8V
97
dB
PSRR
Power Supply Rejection Ratio
V_S = 3V to 40V,
105
124
dB
V_CMIR = Valid Input Voltage
100
dB
A_VOL
Open-Loop Gain
R_L = 10kΩ to ground
120
130
dB
V_O = -13V to +13V
115
dB
V_OH
Output Voltage High,
V₊ to V_OUT
R_L = 10kΩ
110
mV
120
mV
V_OL
Output Voltage Low,
V_OUT to V_-
R_L = 10kΩ
70
mV
80
mV
I_S
Supply Current/Amplifier
0.85
1.1
mA
1.4
mA
I_S+
Source Current Capability
10
I_S-
Sink Current Capability
10
V_SUPPLY
Supply Voltage Range
Guaranteed by PSRR
3
mA
mA
40
V
3
FN7957.1
August 24, 2012