ISL6536A Datasheet, PDF (3/6 Pages) Intersil Corporation – Four Channel Supervisory IC

ISL6536A
Absolute Maximum Ratings
VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +6V
VMON, PGOOD, ENABLE. . . . . . . . . . . . . . . . . -0.3V to VDD+0.3V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4kV (HBM)
Operating Conditions
VDD Supply Voltage Range. . . . . . . . . . . . . . . . . . . . +2.7V to +5.5V
Temperature Range (T_A) . . . . . . . . . . . . . . . . . . . . . . .-40°C to 85°C
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JA (°C/W)
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
108
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 150°C
Maximum Storage Temperature Range . . . . . . . . . . . -65°C to 150°C
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . . 300°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board. See Tech Brief TB379 for details.
2. 2. All voltages are relative to GND, unless otherwise specified.
Electrical Specifications Nominal VDD = 3.3V, T_A = T_J = -40^oC - 85°C, Unless Otherwise Specified
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX UNIT
BIAS
IC Supply Current
VDD Power On
I_VDD
VDD_L2H
VMON > VMON_{_L2H}
VDD low to high
-
165
1000
µA
-
2.6
-
V
VDD Power On Reset
VDD_POR VDD high to low
-
2.4
-
V
PGOOD
Pull-Down Current
Pull-Up Resistance
Output Low
Delay from VMON Rising
Delay from EN Rising
Delay from EN Falling
ENABLE
PG^pd
PG^pu
V_PGl
T_PGdelVMON
T_PGdelENR
T_PGdelENF
VPGOOD = 0.5V
VDD= 1V
Last valid input = Vth to PG release
EN high to PG release
EN low to PG pulling low
-
2
-
mA
-
20
-
kΩ
-
0.05
0.1
V
-
2
-
µs
-
0.05
-
µs
-
0.015
-
µs
Rising Threshold
Threshold Hysteresis
Pull-up Current
VMON INPUT
V_EN
V_{EN_HYS}
I_ENpu
ENABLE Low to High Threshold
VEN = 0.5V
0.4VDD 0.5VDD 0.6VDD V
-
0.065
-
V
-
10
-
µA
Falling Threshold
Falling Threshold Temp Coefficient
Hysteresis
Range
Glitch Filter Duration
3.3VMON_{_H2L}
3.3VMON_{_TC}
VVMON_{_HYS}
VMON_{_RNG}
TFIL
Tj=+25c
VMON glitch to PGOOD low Filter
0.627
-
-
-
-
0.633
33
10
1
30
0.639
-
-
-
-
V
µV/°C
mV
mV
µs
3