ISL6431A Datasheet, PDF (3/10 Pages) Intersil Corporation – Advanced Pulse Width Modulation (PWM) Controller for Broadband Applications

ISL6431A
Absolute Maximum Ratings
Supply Voltage, V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +6.0V
Absolute Boot Voltage, V_BOOT . . . . . . . . . . . . . . . . . . . . . . . +15.0V
Upper Driver Supply Voltage, V_BOOT - V_PHASE . . . . . . . . . . . +6.0V
Input, Output or I/O Voltage . . . . . . . . . . . GND -0.3V to VCC +0.3V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 2
Operating Conditions
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5V ±10%
Ambient Temperature Range. . . . . . . . . . . . . . . . . . . -40^oC to 85^oC
Junction Temperature Range . . . . . . . . . . . . . . . . . -40^oC to 125^oC
Thermal Information
Thermal Resistance (Typical, Note 1)
θ_JA (^oC/W)
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . 150^oC
Maximum Storage Temperature Range . . . . . . . . . -65^oC to 150^oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300^oC
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θ_JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
Electrical Specifications
PARAMETER
Recommended Operating Conditions, Unless Otherwise Noted. V_CC = 5.0V ±5% and T_A = 25^oC
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
VCC SUPPLY CURRENT
Nominal Supply
POWER-ON RESET
I_VCC
2.6
3.2
3.8
Rising VCC POR Threshold
POR
4.19
4.30
4.50
VCC POR Threshold Hysteresis
0.01
0.20
0.85
OSCILLATOR
Frequency
Ramp Amplitude
REFERENCE
f_OSC
∆V_OSC
VCC = 5V
250
300
340
-
1.5
-
Reference Voltage Tolerance
Nominal Reference Voltage
V_REF
-
-
1.5
-
0.800
-
ERROR AMPLIFIER
DC Gain
-
82
-
Gain-Bandwidth Product
GBWP
14
-
-
Slew Rate
SR
COMP = 10pF
4.65
8.0
9.2
GATE DRIVERS
Upper Gate Source Current
Upper Gate Sink Current
Lower Gate Source Current
Lower Gate Sink Current
PROTECTION / DISABLE
I_UGATE-
SRC
V_BOOT - V_PHASE = 5V, V_UGATE = 4V
I_UGATE-SNK
I_LGATE-SRC V_VCC = 5V, V_LGATE = 4V
I_LGATE-SNK
-
-1
-
-
1
-
-
-1
-
-
2
-
OCSET Current Source
Disable Threshold
I_OCSET
V_DISABLE
17
20
22
-
-
0.8
UNITS
mA
V
V
kHz
V_P-P
%
V
dB
MHz
V/µs
A
A
A
A
µA
V
3