English
Language : 

ISL43143_15 Datasheet, PDF (3/16 Pages) Intersil Corporation – Low-Voltage, Single and Dual Supply,Quad SPST, High Performance Analog Switches
ISL43143, ISL43144, ISL43145
Truth Table
ISL43143
ISL43144
ISL43145
LOGIC SW 1, 2, 3, 4 SW 1, 2, 3, 4 SW 1, 4 SW 2, 3
0
ON
OFF
OFF
ON
1
OFF
ON
ON
OFF
NOTE: Logic “0”  0.8V. Logic “1” 2.4V.
Pin Descriptions
PIN
FUNCTION
V+
Positive Power Supply Input
V-
Negative Power Supply Input. Connect to GND
for Single Supply Configurations.
GND
Ground Connection
IN
Digital Control Input
COM
Analog Switch Common Pin
NO
Analog Switch Normally Open Pin
NC
Analog Switch Normally Closed Pin
N.C.
No Internal Connection
Ordering Information
PART NO.*
PART
MARKING
TEMP.
RANGE
(°C)
PKG.
PACKAGE DWG. #
ISL43143IV
(No longer
available or
supported)
43143IV
-40 to 85 16 Ld TSSOP M16.173
ISL43143IVZ
(Note 2)
43143IVZ
-40 to 85 16 Ld TSSOP M16.173
(Pb-free)
ISL43143IR
(No longer
available or
supported)
43143IR
-40 to 85 16 Ld QFN L16.4x4
ISL43143IRZ
(Note 2) (No
longer available
or supported)
43143IRZ
-40 to 85 16 Ld QFN
(Pb-free)
L16.4x4
ISL43144IV (No 43144IV
longer available
or supported)
-40 to 85 16 Ld TSSOP M16.173
ISL43144IVZ
(Note 2)
43144IVZ
-40 to 85 16 Ld TSSOP M16.173
(Pb-free)
ISL43144IR (No 43144IR
longer available
or supported)
-40 to 85 16 Ld QFN L16.4x4
ISL43144IRZ 43144IRZ
(Note 2) (No
longer available,
recommended
replacement:
ISL43120IHZ-T)
-40 to 85 16 Ld QFN
(Pb-free)
L16.4x4
ISL43145IV (No 43145IV
longer available
or supported)
-40 to 85 16 Ld TSSOP M16.173
ISL43145IVZ
(Note 2)
43145IVZ
-40 to 85 16 Ld TSSOP M16.173
(Pb-free)
ISL43145IR (No 43145IR
longer available
or supported)
-40 to 85 16 Ld QFN L16.4x4
ISL43145IRZ
(Note 2) (No
longer available
or supported)
43145IRZ
-40 to 85 16 Ld QFN
(Pb-free)
L16.4x4
*Most surface mount devices are available on tape and reel; add “-T”
to suffix.
NOTE:
2. Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and
100% matte tin plate termination finish, which are RoHS
compliant and compatible with both SnPb and Pb-free soldering
operations. Intersil Pb-free products are MSL classified at
Pb-free peak reflow temperatures that meet or exceed the
Pb-free requirements of IPC/JEDEC J STD-020.
3
FN6037.4
August 31, 2015