ISL35111 Datasheet, PDF (3/8 Pages) Intersil Corporation – 11.1Gb/s Driver

ISL35111
Absolute Maximum Ratings
Supply Voltage (V_DD to GND) . . . . . . . . . . . . -0.3V to 1.5V
Voltage at All Input Pins . . . . . . . . . . . . . . . . -0.3V to 1.5V
ESD Rating
High-Speed Pins . . . . . . . . . . . . . . . . . . . . . 1.5kV (HBM)
All Other Pins . . . . . . . . . . . . . . . . . . . . . . . . 2kV (HBM)
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
16 Ld QFN Package (Notes 4, 5) . . 56
10
Operating Ambient Temperature Range . . . . . . 0°C to +85°C
Storage Ambient Temperature Range . . . . -55°C to +150°C
Maximum Junction Temperature . . . . . . . . . . . . . . . +125°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact
product reliability and result in failures not covered by warranty.
NOTE:
4. θ_JA measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach”
features. See Tech Brief TB379.
5. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Operating Conditions
PARAMETER
Supply Voltage
Operating Ambient Temperature
Bit Rate
SYMBOL
CONDITION
V_DD
T_A
NRZ data applied to any channel
MIN
1.1
0
TYP
1.2
25
10
MAX
1.3
85
11.1
UNITS
V
°C
Gbps
Control Pin Characteristics V_DD = 1.2V, T_A = +25°C, and V_IN = 600mV_P-P, unless otherwise noted.
PARAMETER
SYMBOL
CONDITION
MIN TYP MAX
Input LOW Logic Level
Input HIGH Logic Level
Output LOW Logic Level
Output HIGH Logic Level
Input Current
V_IL
V_IH
V_OL
V_OH
TDSBL
TDSBL
LOS
LOS
Current draw on DC control pin, i.e., DE[A,B]
0
0
350
750
V_DD
0
0
250
1000
V_DD
30
100
UNITS
mV
mV
mV
mV
µA
Electrical Characteristics V_DD = 1.2V, T_A = +25°C, and V_IN = 600mV_P-P, unless otherwise noted.
PARAMETER
SYMBOL
CONDITION
MIN TYP MAX
Supply Current
I_DD De-Emphasis Disabled
65
De-Emphasis Enabled
75
Transmit Disable Mode
1.4
Input Amplitude Range
DC Differential Input
Resistance
V_IN Measured differentially at data source
Measured on input channel IN[P,N]
120
1600
80 100 120
DC Single-Ended
Input Resistance
Input Return Loss Limit
(Differential)
Measured on input channel IN[P] or IN[N], 40
50
60
with respect to V_DD.
S_DD11 100MHz to 4.1GHz
See 6
4.1GHz to 11.1GHz
See 7
Input Return Loss Limit
S_CD11 100MHz to 11.1GHz
-10
(Diff. to Comm. Conversion)
Output Amplitude Range
V_OUT Measured differentially at OUT[P] and
450 700 820
OUT[N] with 50Ω load on both output pins;
de-emphasis disabled
Differential Output
Impedance
Measured on OUT[k]
80 105 120
UNITS NOTES
mA
mA
mA
mV_P-P
Ω
Ω
dB
6
dB
7
dB
8
mV_P-P
Ω
3
FN6975.0
November 19, 2009