ISL28108 Datasheet, PDF (3/25 Pages) Intersil Corporation – 40V Precision Single Supply Rail-Rail Output Low Power Operational Amplifiers

ISL28108, ISL28208
Absolute Maximum Ratings
Maximum Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42V
Maximum Differential Input Voltage
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42V or V_- - 0.5V to V₊ + 0.5V
Min/Max Input Voltage . . . . . . . . . . . . . . . . . . .42V or V_- - 0.5V to V₊ + 0.5V
Max/Min Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20mA
Output Short-Circuit Duration (1 output at a time) . . . . . . . . . . . Indefinite
ESD Tolerance
Human Body Model (Tested per JESD22-A114F) . . . . . . . . . . . . . . . . 6kV
Machine Model (Tested per JESD22-A115-C) . . . . . . . . . . . . . . . . . . 400V
Charged Device Model (Tested per JESD22-C110D) . . . . . . . . . . . . . 2kV
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
8 Ld SOIC Package (108, 208, Notes 4, 6) . . 120
55
8 Ld TDFN Package (208, Notes 5, 6) . . . . . .
48
5.5
8 Ld MSOP Package (208, Notes 4, 6). . . . . . 150
45
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . -65°C to +150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Ambient Operating Temperature Range . . . . . . . . . . . . . . -40°C to +125°C
Maximum Operating Junction Temperature . . . . . . . . . . . . . . . . . . +150°C
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3V (±1.5V) to 40V (±20V)
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4. θ_JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
5. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
6. For θ_JC, the “case temp” location is taken at the package top center.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise
noted, all tests are at the specified temperature and are pulsed tests, therefore: T_J = T_C = T_A
Electrical Specifications V_S ±15V, V_CM = 0, V_O = 0V, R_L = Open, T_A= +25°C, unless otherwise noted. Boldface limits apply over
the operating temperature range, -40°C to +125°C. Temperature data established by characterization.
PARAMETER
DESCRIPTION
CONDITIONS
MIN
MAX
(Note 7)
TYP
(Note 7) UNIT
V_OS
Input Offset Voltage
-230
25
-330
230
µV
330
µV
TCV_OS
Input Offset Voltage Temperature ISL28208 SOIC
Coefficient
-40°C to +125°C
0.1
1.1
µV/°C
ISL28208 TDFN
-40°C to +125°C
0.2
1.4
µV/°C
ΔV_OS
Input Offset Voltage Match
(ISL28208 only)
-300
5
300
µV
-400
400
µV
I_B
Input Bias Current
-43
-13
nA
-63
nA
TCI_B
Input Bias Current
Temperature Coefficient
70
pA/°C
I_OS
Input Offset Current
-3
0
-4
3
nA
4
nA
CMRR
Common-Mode Rejection Ratio
V_CM = V_- -0.5V to V₊ -1.8V
V_CM = V_- -0.2V to V₊ -1.8V
119
dB
123
dB
102
dB
V_CM = V_- to V₊ -1.8V
105
123
dB
102
115
dB
V_CMIR
Common Mode Input Voltage
Range
Guaranteed by CMRR test
V_- - 0.5
V_-
V₊ - 1.8
V
V₊ - 1.8
V
3
FN6935.1
March 17, 2011