|
HIP6005A Datasheet, PDF (3/12 Pages) Intersil Corporation – Buck Pulse-Width Modulator (PWM) Controller and Output Voltage Monitor | |||
|
◁ |
HIP6005A
Absolute Maximum Ratings
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +15V
Boot Voltage, VBOOT - VPHASE. . . . . . . . . . . . . . . . . . . . . . . . +15V
Input, Output or I/O Voltage . . . . . . . . . . . .GND -0.3V to VCC +0.3V
ESD Classiï¬cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 2
Operating Conditions
Supply Voltage, VCC . . . . . .
Ambient Temperature Range
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
+12V ±10%
0oC to 70oC
Junction Temperature Range . . . . . . . . . . . . . . . . . . . . 0oC to 125oC
Thermal Information
Thermal Resistance (Typical, Note 1)
θJA (oC/W)
SOIC Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
110
SOIC Package (with 3in2 of Copper) . . . . . . . . . . .
86
Maximum Junction Temperature (Plastic Package) . . . . . . . .150oC
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . .300oC
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in âAbsolute Maximum Ratingsâ may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this speciï¬cation is not implied.
NOTE:
1. θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Speciï¬cations Recommended Operating Conditions, Unless Otherwise Noted
PARAMETER
SYMBOL
TEST CONDITIONS
VCC SUPPLY CURRENT
Nominal Supply
POWER-ON RESET
ICC
UGATE Open
Rising VCC Threshold
Falling VCC Threshold
Rising VOCSET Threshold
OSCILLATOR
VOCSET = 4.5V
VOCSET = 4.5V
Free Running Frequency
RT = Open
Total Variation
6k⦠< RT to GND < 200kâ¦
Ramp Amplitude
REFERENCE AND DAC
âVOSC RT = Open
DAC(VID0-VID4) Input Low Voltage
DAC(VID0-VID4) Input High Voltage
DACOUT Voltage Accuracy
ERROR AMPLIFIER
DC Gain
Gain-Bandwidth Product
GBW
Slew Rate
SR
COMP = 10pF
GATE DRIVER
Upper Gate Source
Upper Gate Sink
PROTECTION
IUGATE
RUGATE
VBOOT - VPHASE = 12V, VUGATE = 6V
Over-Voltage Trip (VSEN/DACOUT)
OCSET Current Source
OVP Sourcing Current
Soft Start Current
IOCSET
IOVP
ISS
VOCSET = 4.5V
VSEN = 5.5V; VOVP = 0V
MIN TYP MAX UNITS
-
5
-
mA
-
- 10.4
V
8.2
-
-
V
- 1.26 -
V
185 200 215
-15
-
+15
-
1.9
-
kHz
%
VP-P
-
-
0.8
V
2.0
-
-
V
-1.0
-
+1.0
%
-
88
-
dB
-
15
-
MHz
-
6
-
V/µs
350 500
-
mA
-
5.5 10
â¦
-
115 120
%
170 200 230
µA
60
-
-
mA
-
10
-
µA
2-100
|
▷ |