HI5804 Datasheet, PDF (3/11 Pages) Intersil Corporation – 12-Bit, 5 MSPS A/D Converter

HI5804
Absolute Maximum Ratings
Thermal Information
Supply Voltage, AV_CC or DV_CC to A_GND or D_GND . . . . . . . . . . . +6.0V
D_GND to A_GND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3V
Digital I/O Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D_GND to DV_CC
Analog I/O Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A_GND to AV_CC
Operating Conditions
Temperature Range, HI5804KCB . . . . . . . . . . . . . . . . . . 0^oC to 70^oC
Thermal Resistance (Typical, Note 1)
θ_JA(^oC/W)
HI5804KCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
70
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . 150^oC
Maximum Storage Temperature Range . . . . . . . . . . -65^oC to 150^oC
Maximum Lead Temperature (Soldering, 10s) . . . . . . . . . . . . 300^oC
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of
the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θ_JA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications AV_CC = DV_CC1 = DV_CC2 = +5.0V, f_S = 5 MSPS at 50% Duty Cycle, V_RIN = 3.5V, C_L = 10pF,
T_A = 25^oC, Unless Otherwise Specified
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
ACCURACY
Resolution
12
-
-
Integral Linearity Error, INL
Differential Linearity Error, DNL
(Guaranteed No Missing Codes)
f_IN = DC
f_IN = DC
-
±2
-
-
± 0.5
±1
Offset Error, V_OS
Full Scale Error, FSE
DYNAMIC CHARACTERISTICS
f_IN = DC
f_IN = DC
-
12
-
-
24
-
Minimum Conversion Rate
No Missing Codes
-
0.5
-
Maximum Conversion Rate
No Missing Codes
-
5
-
Effective Number of Bits, ENOB
Signal to Noise and Distortion Ratio, SINAD
= _R-----_M-----_S------_NR----_oM---_i--_sS---_e---^S--₊--ⁱ-^g--_D--ⁿ--_i-^a-_s--^l-_t-_o----_r--_t-_i--_o---_n-
f_IN = 1MHz
f_IN = 1MHz
-
10.3
-
-
64
-
UNITS
Bits
LSB
LSB
LSB
LSB
MSPS
MSPS
Bits
dB
Signal to Noise Ratio, SNR
= ^R-_R----^M-_M----^S-_S-----^SN----ⁱ-_og---_in-_s---^ae---^l
f_IN = 1MHz
Total Harmonic Distortion, THD
2nd Harmonic Distortion
3rd Harmonic Distortion
Spurious Free Dynamic Range, SFDR
Intermodulation Distortion, IMD
Transient Response
f_IN = 1MHz
f_IN = 1MHz
f_IN = 1MHz
f_IN = 1MHz
f₁ = 1MHz, f₂ = 1.02MHz
Over-Voltage Recovery
0.2V Overdrive
ANALOG INPUT
Maximum Peak-to-Peak Differential Analog Input Range
(V_IN+ - V_IN-)
Maximum Peak-to-Peak Single-Ended Analog Input Range
Analog Input Resistance, R_IN
Analog Input Capacitance, C_IN
Analog Input Bias Current, I_B+ or I_B-
Differential Analog Input Bias Current I_{B DIFF} = (I_B+ - I_B-)
Full Power Input Bandwidth, FPBW
(Notes 2, 3)
Analog Input Common Mode Voltage (V_IN+ + V_IN-)/2
Differential Mode (Note 2)
-
65
-
dB
-
-70
-
dBc
-
-73
dBc
-
-73
-
dBc
-
73
-
dBc
-
-66
-
dBc
-
1
-
Cycle
-
2
-
Cycle
-
±2.0
-
V
-
4.0
-
V
1
-
-
MΩ
-
10
-
pF
-10
-
+10
µA
-
±0.5
-
µA
-
100
-
MHz
1
2.3
4
V
3