 English |
|
|
|
|
|
|
|
| HI-5701 Datasheet, PDF (3/14 Pages) Intersil Corporation – 6-Bit, 30MSPS, Flash A/D Converter | |||
| |||
| ◁ |
HI-5701
Absolute Maximum Ratings
Supply Voltage, VDD to VSS . . . . . . . . . . . (VSS - 0.5) < VDD < +7V
Analog and Reference Input Pins (VSS - 0.5) < VINA < (VDD +0.5V)
Digital I/O Pins . . . . . . . . . . . . . . . .(VSS - 0.5) < VI/O < (VDD +0.5V)
Operating Conditions
Temperature Range
HI3-5701-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to 70oC
HI9P5701-9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to 85oC
Thermal Information
Thermal Resistance (Typical, Note 1)
θJA (oC/W)
PDIP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
75
SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
105
Maximum Power Dissipation at 70oC (Note 2) . . . . . . . . . . .635mW
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . .150oC
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . .300oC
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in âAbsolute Maximum Ratingsâ may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this speciï¬cation is not implied.
NOTES:
1. θJA is measured with the component mounted on an evaluation PC board in free air.
2. Dissipation rating assumes device is mounted with all leads soldered to printed circuit board.
Electrical Speciï¬cations
VDD = +5.0V; VREF+ = +4.0V; VREF- = VSS = GND; fS = Speciï¬ed Clock Frequency at 50% Duty Cycle;
CL = 30pF; Unless Otherwise Speciï¬ed
25oC
(NOTE 3)
0oC TO 70oC
-40oC TO 85oC
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
MIN
MAX UNITS
SYSTEM PERFORMANCE
Resolution
6
-
-
6
-
Bits
Integral Linearity Error, INL
(Best Fit Line)
Differential Linearity Error, DNL
(Guaranteed No Missing Codes)
Offset Error, VOS
(Adjustable to Zero)
Full Scale Error, FSE
(Adjustable to Zero)
DYNAMIC CHARACTERISTICS
fS = 20MHz
fS = 30MHz
fS = 20MHz
fS = 30MHz
fS = 20MHz (Note 3)
fS = 30MHz
fS = 20MHz (Note 3)
fS = 30MHz
-
±0.5 ±1.25
-
±2.0
LSB
-
±1.5
-
-
-
LSB
-
±0.3
±0.6
-
±0.75
LSB
-
±0.7
-
-
LSB
-
±0.5
±2.0
-
±2.5
LSB
-
±0.5
-
-
-
LSB
-
±0.25 ±2.0
-
±2.5
LSB
-
±0.25
-
-
-
LSB
Maximum Conversion Rate
No Missing Codes
30
40
-
30
-
MSPS
Minimum Conversion Rate
No Missing Codes (Note 3)
-
-
0.125
-
0.125 MSPS
Full Power Input Bandwidth
Signal to Noise Ratio, SNR
= R--R---M-M-----SS------NS----io-g---i-ns---ea---l
fS = 30MHz
fS = 1MHz, fIN = 100kHz
fS = 30MHz, fIN = 4MHz
-
20
-
-
-
MHz
-
36
-
-
-
dB
-
31
-
-
-
dB
Signal to Noise Ratio, SINAD
= R-----M-----S-----R-N----oM---i--s-S--e----S-+---i-g-D--n--i-s-a--t-l-o---r--t--i-o----n-
Total Harmonic Distortion
Differential Gain
Differential Phase
fS = 1MHz, fIN = 100kHz
fS = 30MHz, fIN = 4MHz
fS = 1MHz, fIN = 100kHz
fS = 30MHz, fIN = 4MHz
fS = 14.32MHz, fIN = 3.58MHz
fS = 14.32MHz, fIN = 3.58MHz
-
35
-
-
-
dB
-
30
-
-
-
dB
-
-44
-
-
-
dBc
-
-38
-
-
-
dBc
-
2
-
-
-
%
-
2
-
-
-
Degree
3
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese